We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 8SFF 2× Xeon E5-2680v4 768GB DDR4 rack server

SKU CH-99BP-NKSQF

Dual 2.4 GHz Xeon E5-2680v4 processors with 768 GB DDR4 and eight 2.5-inch bays in a 2U rack server

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.4GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size768GB
  • Dual Xeon E5-2680v4 processors deliver 14 cores each for parallel workloads
  • 768GB DDR4 ECC memory supports large datasets and virtualisation
  • PERC H730 SAS controller manages up to 8 drive bays
  • Intel I350 X540 network card provides 2× 10GbE and 2× 1GbE ports
  • iDRAC8 Enterprise license enables remote server management

Dual Xeon E5-2680v4 server for dense virtualisation

This 2U rack system ships with two 14-core Intel Xeon E5-2680v4 processors running at 2.4GHz. It targets organisations that need high core counts and large memory capacity in a compact footprint for virtualisation, database or compute clusters. The eight 2.5-inch drive bays and PERC H730 SAS controller provide flexible local storage options.

Upgrade from single-socket or lower-core platforms

Moving from a single-socket host or older 8-core CPUs to this dual 14-core configuration doubles thread capacity and expands the memory ceiling to 768GB DDR4. The jump is worthwhile when workloads exceed the memory or scheduler limits of smaller nodes and licensing costs favour denser hosts. Buyers who need more than two sockets or newer instruction sets must look at larger platforms.

768GB DDR4 ceiling with eight drive bays

The system arrives fully populated at the 768GB maximum, leaving no headroom for further memory expansion. Eight SFF bays accept SATA or SAS drives behind the PERC H730, so capacity scales with the drives you add. Integrated graphics and dual 10GbE plus dual 1GbE ports handle console and network needs without extra cards. Builds requiring GPU acceleration or more than eight drives need a different chassis.

Highlights

  • Dual Xeon E5-2680v4 processors deliver 14 cores each for parallel workloads
  • 768GB DDR4 ECC memory supports large datasets and virtualisation
  • PERC H730 SAS controller manages up to 8 drive bays
  • Intel I350 X540 network card provides 2× 10GbE and 2× 1GbE ports
  • iDRAC8 Enterprise license enables remote server management

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.4GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)3.840,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

Will the 36-inch depth fit my 42U rack?

The server is 36 inches deep, so verify your rack has at least that much usable depth plus room for rear cables and the two 495 W power supplies.

How do I install the PERC H730 RAID controller and avoid the common cabling mistake?

Seat the PERC H730 in the dedicated storage slot, then connect the SAS cables to the 8 SFF backplane; the step often missed is routing cables before sliding the server into the rack.

When will the 768 GB DDR4 memory or the two Xeon E5-2680v4 CPUs need replacement?

DDR4 ECC modules and the Xeon E5-2680v4 processors are rated for continuous server duty; plan replacement only if diagnostics report correctable errors or a capacity upgrade is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.