HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7540 8-Port NVMe RAID AIC
$1,749.99
0.02223226BTC
In stock
DELL
DELL PowerEdge R740 8LFF 2x Xeon 6130 256GB DDR4
Eight-bay 3.5-inch rack server with dual Xeon 6130 CPUs at 2.1 GHz, 256 GB DDR4 ECC, PERC H730P RAID controller, 10 GbE networking and iDRAC9 remote management
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual Xeon 6130 CPUs deliver 16 cores each at 2.1 GHz
- 256 GB DDR4 ECC memory supports demanding virtualization workloads
- Eight 3.5-inch drive bays with PERC H730P controller enable large SATA arrays
- iDRAC9 Enterprise remote management provides full out-of-band server control
- Redundant 750 W power supplies keep the rack system running during failures
Rack server with dual Xeon Silver 6130
This Dell PowerEdge R740 chassis holds up to eight 3.5" drives and ships with two Xeon Silver 6130 processors running at 2.1GHz. 256GB of DDR4 ECC registered memory is installed across the available slots. The PERC H730P RAID controller manages storage arrays while an integrated 10GbE dual-port 562T adapter handles network traffic. Designed for virtualisation hosts, database nodes or dense compute clusters that need flexible local storage capacity.
Dual 750W supplies and iDRAC9 Enterprise
Two 750W power supplies provide redundancy for the dual-processor configuration and eight-drive backplane. iDRAC9 Enterprise licence enables full remote console, power control and hardware monitoring over the network. Firmware and BIOS are updated to the latest stable release before dispatch and each unit completes a burn-in diagnostic cycle. The 2U rack form factor fits standard cabinets without special clearance requirements.
No drives or rails included by default
Storage drives are not installed; the eight SATA bays accept compatible 3.5" HDDs or SSDs that you add separately. Rail kits are available on request rather than bundled in the box. The PERC H730P controller supports RAID 0, 1, 5, 6, 10, 50 and 60 for the drives you choose. Buyers who need pre-populated arrays or specific drive capacities must request a custom configuration before ordering.
Highlights
- Dual Xeon 6130 CPUs deliver 16 cores each at 2.1 GHz
- 256 GB DDR4 ECC memory supports demanding virtualization workloads
- Eight 3.5-inch drive bays with PERC H730P controller enable large SATA arrays
- iDRAC9 Enterprise remote management provides full out-of-band server control
- Redundant 750 W power supplies keep the rack system running during failures
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 16,00 |
| Storage Controller | Dell PERC H730P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the 256 GB DDR4 modules and which step is often missed?
Seat each DDR4 module fully until the ejector clips click, then verify in the iDRAC9 inventory that all 256 GB are recognised before closing the chassis.
What maintenance will the PERC H730P RAID controller need later?
The PERC H730P uses a replaceable battery-backed cache module; plan to swap that battery unit when the iDRAC9 reports a degradation alert.
What limit appears first when the dual Xeon 6130 CPUs run sustained workloads?
The 750 W power supplies set the sustained ceiling; the iDRAC9 will throttle the Xeon 6130 package if total draw approaches that 750 W rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7502 2-Port M.2 NVMe RAID Controller
$708.99
0.00900717BTC
In stock
