We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R740 8LFF 2x Xeon Silver 4110 1.5TB DDR4

SKU CH-FKJE-18GC3

Eight 3.5-inch drive bays, dual 2.1 GHz Xeon Silver 4110 processors and 1.5 TB DDR4 memory in a rack-mount chassis

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size1.5TB
  • Dual Xeon Silver 4110 CPUs provide 2.1 GHz base frequency for multi-threaded workloads
  • 5 TB DDR4 ECC memory supports large virtualisation and database capacity
  • PERC H730P RAID controller manages up to 8 × 3.5″ SATA drive bays
  • iDRAC9 Enterprise licence enables full remote management and firmware updates
  • Redundant 750 W power supplies maintain uptime during component failure

PowerEdge R740 8LFF dual Xeon Silver 4110

The Dell PowerEdge R740 is a 2U rack server built for memory-intensive workloads. It ships with two Intel Xeon Silver 4110 processors at 2.1GHz and 1.5TB of DDR4 ECC registered memory. The chassis provides eight 3.5-inch drive bays and a PERC H730P RAID controller. Remote management is handled by iDRAC9 Enterprise.

Suited for virtualization hosts

This configuration fits buyers who need high core counts and massive RAM capacity in a dense 2U form factor. It is not for buyers who need GPU acceleration, flash tiers or single-thread frequency above 2.1GHz. The integrated graphics and SATA-only drive interface limit high-performance storage or compute add-ons.

1.5TB DDR4 ECC registered memory installed

The system arrives with 1.5TB of DDR4 ECC registered RAM across 24 DIMM slots, leaving room to reach the 3TB maximum. Memory type and capacity are fixed to DDR4; other generations will not fit. Verify your application’s memory scaling before ordering.

Highlights

  • Dual Xeon Silver 4110 CPUs provide 2.1 GHz base frequency for multi-threaded workloads
  • 5 TB DDR4 ECC memory supports large virtualisation and database capacity
  • PERC H730P RAID controller manages up to 8 × 3.5″ SATA drive bays
  • iDRAC9 Enterprise licence enables full remote management and firmware updates
  • Redundant 750 W power supplies maintain uptime during component failure

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size1.5TB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)32,00
Storage ControllerDell PERC H730P Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC9 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What power supplies must I already have to run the 2× Xeon Silver 4110 configuration?

The system ships with two 750 W power supplies installed, so no additional units are required for the dual-processor setup.

Will my existing 3.5″ SATA drives work with the PERC H730P controller in the 8-bay chassis?

Yes, the eight 3.5″ bays use SATA interfaces and the PERC H730P RAID controller supports standard SATA hard drives for storage arrays.

How can I confirm the iDRAC9 Enterprise licence is active after the firmware update?

Log into the iDRAC web interface; the dashboard will display the Enterprise licence status and show the latest firmware version applied during burn-in testing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.