We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tower server chassis, matte black finish, front drive bays visible

DELL

DELL PowerEdge T440 5U Server 2x Xeon Silver 4210 2.2GHz 10 Core 16GB DDR4 H730P 4x 960GB SSD 2x 750W

SKU CH-D7PD-N5WYK

Dual 10-core Xeon Silver 4210 at 2.2 GHz with 16 GB DDR4, PERC H730P RAID and four 960 GB SSDs in a 5U tower

  • TypeRack
  • Rack Height5U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz (3.2GHz Turbo)
  • CPU SocketLGA 3647
  • Dual Xeon Silver 4210 CPUs provide 10 cores each for multi-threaded workloads
  • 16 GB DDR4-2400 ECC registered memory supports data integrity
  • PERC H730P RAID controller enables RAID 0, 1, 5, 6, 10, 50, 60
  • Four 960 GB SATA SSDs deliver fast read performance
  • Dual 750 W platinum power supplies ensure redundant operation

Enterprise Tower Server

The Dell PowerEdge T440 is a 5U tower server fitted with two Intel Xeon Silver 4210 processors, each running at 2.2GHz with a 3.2GHz turbo frequency. It ships with 16GB of DDR4 ECC registered memory and a PERC H730P controller managing four 960GB SATA solid-state drives. The chassis provides sixteen 2.5-inch hot-swap bays for storage expansion and includes dual-port gigabit ethernet plus iDRAC 9 Express for remote management.

Installation Notes

Redundant 750-watt platinum power supplies are hot-swappable, so a failed unit can be replaced without shutting down the server. Drive bays use tool-less carriers that accept 2.5-inch SAS or SATA drives, and the H730P controller supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. The front bezel and ready rails are not included, so plan for separate rack-mount hardware if you intend to convert the tower to a rack format.

Pre-Order Checks

Verify that your environment can accommodate a 5U tower form factor and that you have adequate power circuits for dual 750-watt supplies. Confirm the DDR4 ECC registered memory type matches any additional modules you intend to install across the sixteen available slots. Ensure your operating system and hypervisor are compatible with the Xeon Silver 4210 architecture and the PERC H730P storage controller before deployment.

Highlights

  • Dual Xeon Silver 4210 CPUs provide 10 cores each for multi-threaded workloads
  • 16 GB DDR4-2400 ECC registered memory supports data integrity
  • PERC H730P RAID controller enables RAID 0, 1, 5, 6, 10, 50, 60
  • Four 960 GB SATA SSDs deliver fast read performance
  • Dual 750 W platinum power supplies ensure redundant operation

Specifications

BrandDELL
SeriesPowerEdge
ModelT440
TypeRack
Rack Height5U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.2GHz (3.2GHz Turbo)
CPU SocketLGA 3647
Number of CPU Cores10 Core-Processors
CPU FeaturesSilver 4210
# of Processors Installed2
MAX Processors2
Installed Memory Size16GB
Memory TypeDDR4
Max Memory Capacity1TB
Number of Memory Slots16
Hard Drive (Installed)None
Storage ControllerDell Perc H730P 2GB Controller
HDD InterfaceSATA
SSD (Installed)4 x 960GB SATA SSD
Raid LevelRAID 0/1/5/6/10/50/60
Ethernet ControllerIntegrated Dell 2x1GbE Dual Port Ethernet Adapter
Remote ManagementiDRAC9 Express
LAN Ports2 x Ports
Management PortRJ 45
Operating SystemNo

Questions about this item

How do I verify the PERC H730P controller is operating correctly after installing the four 960GB SSDs?

During POST the controller BIOS lists each detected drive and its RAID status; the iDRAC 9 Express dashboard then shows all four 960GB SATA SSDs as online with green health indicators and the configured RAID level active.

Which items ship with the server and which must be purchased separately?

The unit includes two Xeon Silver 4210 processors, 16GB DDR4-2400 ECC RDIMM in two 8GB modules, the PERC H730P 2GB controller with battery, four 960GB 2.5" SATA SSDs, dual-port Gigabit Ethernet, iDRAC 9 Express and two 750W platinum power supplies; front bezel and ready rails are not included.

Which memory capacity should I choose for this T440 configuration?

The board has sixteen DDR4 slots and supports up to 1TB; the installed 16GB (2x 8GB) leaves fourteen slots free, so add matched DDR4-2400 ECC registered DIMMs in pairs to reach the capacity your workload requires.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.