DELL
DELL PowerEdge T630 18LFF 2x Xeon E5-2699v4 768GB DDR4 No Drive Rack Server
An 18-bay rack server with dual 22-core Xeon CPUs at 2.2 GHz, 768 GB DDR4 ECC memory and a PERC H730 SAS controller, sold without drives
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual Xeon E5-2699 v4 CPUs provide 22 cores each at 2.2GHz
- 768GB DDR4 ECC registered memory installed with capacity up to 1.5TB
- 18 bays for 3.5" SATA drives backed by PERC H730 SAS controller
- iDRAC8 Enterprise licence enables remote management and monitoring
- Dual 1100W power supplies and 1Gb dual-port network adapter fitted
Enterprise rack server for compute-intensive
The Dell PowerEdge T630 arrives in a 18-bay 3.5-inch chassis populated with dual Xeon E5-2699 v4 processors running at 2.2 GHz and 22 cores each. A total of 768 GB of DDR4 ECC registered memory is installed, leaving headroom to the 1.5 TB maximum. The PERC H730 SAS controller manages storage across the available drive bays while an integrated 1 GB dual-port 332T network adapter handles connectivity.
Dual 1100 W power supplies
Redundant 1100 W units share the load during normal operation, keeping the system running if one module fails. The iDRAC8 Enterprise licence provides out-of-band monitoring, power control and virtual console access without attaching a local keyboard, monitor or mouse. Firmware and BIOS are updated to the latest stable release before shipment and every unit completes a full burn-in test.
No drives installed — storage
The chassis ships without any hard drives, so capacity and RAID level are chosen when the order is placed. A rail kit is available on request for rack mounting. Buyers who need drives pre-populated or a different memory configuration should specify those changes before purchase.
Highlights
- Dual Xeon E5-2699 v4 CPUs provide 22 cores each at 2.2GHz
- 768GB DDR4 ECC registered memory installed with capacity up to 1.5TB
- 18 bays for 3.5" SATA drives backed by PERC H730 SAS controller
- iDRAC8 Enterprise licence enables remote management and monitoring
- Dual 1100W power supplies and 1Gb dual-port network adapter fitted
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 9,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the PERC H730 RAID controller and what is the common mistake?
The PERC H730 installs in the dedicated internal slot; the step often missed is cabling each of the 18 drive backplanes to the controller ports before powering on.
What maintenance will the 1100W power supplies need later?
The two 1100W units are hot-plug redundant; plan to replace a unit only if its status LED shows a fault or after several years of continuous operation.
What limit appears first when both Xeon E5-2699 v4 CPUs run at 2.2 GHz under sustained load?
The 1100W power supply rating is the first ceiling; full 22-core activity on both sockets can approach the combined wattage limit before thermal throttling engages.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



