Seagate
Seagate Cheetah NS ST3400755SSProduct 400 GB 3.5" SAS internal hard drive
- SLC
$23.99
0.00030554BTC
In stock
DELL
DELL ST900MM0006 900GB 10K 6Gb/s 2.5" SAS internal hard drive
A 2.5-inch SAS drive holding 900 GB at 10000 RPM with a 64 MB buffer, supplied new with a PowerEdge caddy
- 900 GB capacity supports large server workloads
- 10000 RPM spindle speed accelerates transaction processing
- 6 Gb/s SAS interface delivers consistent throughput
- 64 MB cache buffers burst I/O demand
- Includes PowerEdge server tray for direct installation
Dell SAVVIO 10K.6 900GB SAS Drive
This Dell SAVVIO 10K.6 internal hard drive delivers 900GB of storage on a 2.5-inch SAS 6Gb/s interface. It spins at 10000RPM with a 64MB buffer and includes a PowerEdge server caddy for direct installation. The unit is new with zero operating hours recorded.
Suited for PowerEdge server maintenance
This drive fits the listed PowerEdge models including M610, R620, R720, T620 and others shown in the compatibility list. It is not for systems that lack a 2.5-inch SAS drive bay or a compatible backplane. Buyers who need a different capacity or interface should look at other parts.
The 6Gb/s SAS interface decides fit
The drive connects through a 2.5-inch SAS 6Gb/s port, so the host must provide that exact interface. Without a matching SAS backplane or controller the drive cannot be used. Verify the server specification before purchase.
Highlights
- 900 GB capacity supports large server workloads
- 10000 RPM spindle speed accelerates transaction processing
- 6 Gb/s SAS interface delivers consistent throughput
- 64 MB cache buffers burst I/O demand
- Includes PowerEdge server tray for direct installation
Specifications
No published specifications for this item yet.
Questions about this item
What does the 6Gb/s SAS interface cap at in real-world throughput?
The 6Gb/s SAS link limits sequential transfers to roughly 600 MB/s, so the 10000 RPM platters and 64 MB cache will hit that ceiling before the drive itself becomes the bottleneck.
What physical clearance does the 2.5" drive with its included caddy need inside a PowerEdge chassis?
The drive plus its Dell PowerEdge tray occupies a standard 2.5-inch hot-swap bay; the assembly is 15 mm thick and weighs 1.0 pound, so it fits any listed server without extra brackets.
How is the drive installed in a PowerEdge server, and what step is often missed?
Slide the caddied drive into an empty hot-swap bay until the latch clicks, then verify the SAS backplane detects it in the RAID controller BIOS before initializing the volume — skipping the BIOS check is the common oversight.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
