We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black tower UPS with six C13 outlets on the rear panel

Eaton

Eaton 5P850G 850 VA 600 W UPS

SKU CH-39Z9-PKNED MPN 5P850G

Line-interactive UPS delivers 850 VA and 600 W with six C13 outlets, USB and RS-232 management, plus RJ-45 data-line protection

  • International Version230V
  • Input Voltage Range160-294Vac (adjustable to 150-294 Vac)
  • Input Frequency50/60 Hz (auto-sensing)
  • Input ConnectionIEC-320-C14
  • VA Rating850VA
  • Watts600W
  • 850 VA and 600 W capacity keeps critical equipment running during outages
  • Pure sine-wave output protects sensitive servers and networking gear
  • Six C13 outlets connect multiple devices without extra power strips
  • USB and RS-232 ports enable automated shutdown and remote monitoring
  • Adjustable input range from 150 V to 294 V reduces battery drain

Reliable backup for networking gear

The Eaton 5P850G is a line-interactive UPS rated at 850 VA and 600 W, designed to protect servers, VoIP phones, storage arrays and PoE switches in small business, education, retail and healthcare environments. It provides pure sine-wave output at 230 V by default, with selectable voltages of 200, 208, 220 or 240 V. Six IEC-320-C13 outlets supply protected power, while an IEC-320-C14 inlet connects to the mains. RS-232 and USB ports enable monitoring through the included Intelligent Power Software Suite.

Consistent output under sustained load

The unit delivers 20 percent more real wattage than traditional designs of the same VA rating, keeping the full 600 W available during extended outages rather than only in short bursts. Its input range spans 160 to 294 Vac and can be widened to 150 to 294 Vac, while auto-sensing handles both 50 Hz and 60 Hz sources. Data-line protection covers RJ-45 Ethernet and fax connections, guarding network paths alongside the power path.

Quiet operation within standard office limits

Weighing 22.8 lb and measuring 9.1 by 5.9 by 13.6 inches (H × W × D), the tower-form factor sits on a desk or shelf without rack-mount hardware. The line-interactive topology corrects most voltage fluctuations without engaging the battery, reducing wear and audible clicking. USB and RS-232 cables are supplied for immediate integration with management software.

Highlights

  • 850 VA and 600 W capacity keeps critical equipment running during outages
  • Pure sine-wave output protects sensitive servers and networking gear
  • Six C13 outlets connect multiple devices without extra power strips
  • USB and RS-232 ports enable automated shutdown and remote monitoring
  • Adjustable input range from 150 V to 294 V reduces battery drain

Specifications

BrandEATON
Model5P850G
International Version230V
Input Voltage Range160-294Vac (adjustable to 150-294 Vac)
Input Frequency50/60 Hz (auto-sensing)
Input ConnectionIEC-320-C14
VA Rating850VA
Watts600W
Output Voltage230V default (200/208/220/230/240V)
Outlets6
Outlet TypeIEC-320-C13
Interface PortRS-232, USB
Management SoftwareEaton Intelligent Power Software Suite CD (included)
RackmountableNot rack-mountable
Data Line ProtectionRJ-45 Ethernet /Fax protection
Features22.8 lbs.
Dimensions9.1 x 5.9 x 13.6 (H x W x D, inches)
Weight22.8 lb
Package Contents850VA 600W 230V 5P Line-Interactive UPS with 6 Outlets
USB cable
RS-232 cable
(2) IEC to IEC jumper cables
Quick Start Guide
Shipping weight11.34 kg
Package size457 × 330 × 254 mm

Questions about this item

How much heat and noise does the 5P850G produce when running continuously at full 600 W load?

The line-interactive design only runs the inverter during outages, so normal operation draws minimal power and generates little heat; the unit has no published acoustic or thermal ratings.

What cables or connections must I already have to use the six C13 outlets and the C14 input on this UPS?

You need a C13-to-C14 power cord for each device you connect to the six outlets and a C14-to-wall cord for the input; two IEC-to-IEC jumper cables are included in the box.

Will the RS-232 and USB management ports work with older servers that only have serial or USB-A interfaces?

Yes, both an RS-232 cable and a USB cable are supplied, so the UPS can communicate with legacy serial ports or standard USB-A ports without extra adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.