We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A silver 2.5 inch SAS hard drive in a black carrier tray

HP

HP EG0600FBLSH 600GB 10000RPM 2.5" SAS internal hard drive

SKU CH-B5F2-2Q773

600 GB 10 000 RPM 2.5" SAS drive with Smart Carrier caddy for HP ProLiant Gen 6 and Gen 7 servers

  • 600 GB capacity stores large datasets
  • 10000 RPM spindle speed accelerates data access
  • SAS 6Gb/s interface delivers high-throughput connectivity
  • 5 inch small form factor fits dense server bays
  • Includes Smart Carrier tray for tool-less installation

Capacity and Interface

This is a 600GB 2.5 inch SAS internal hard drive spinning at 10000RPM with a 6Gb/s interface. It is designed for HP ProLiant Gen 6 and Gen 7 servers and ships with a SMART CARRIER caddy tray. The drive suits administrators who need replacement or expansion storage for these specific platforms. It is not suited for systems lacking a SAS backplane or controller.

Thermals and Power

The 10000RPM spindle speed produces more heat and audible noise than slower nearline drives, so adequate chassis airflow is required. Power draw will be higher than lower-speed drives under sustained workloads. The included carrier ensures proper alignment in supported hot-plug bays for consistent thermal contact.

Compatibility Constraint

This drive is validated only for HP ProLiant Gen 6 and Gen 7 servers. Buyers with Gen 8 or newer servers, non-HP hardware, or desktop workstations without SAS infrastructure cannot use this part. The specific server generation support is the single specification that determines whether this is the correct component.

Highlights

  • 600 GB capacity stores large datasets
  • 10000 RPM spindle speed accelerates data access
  • SAS 6Gb/s interface delivers high-throughput connectivity
  • 5 inch small form factor fits dense server bays
  • Includes Smart Carrier tray for tool-less installation

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the EG0600FBLSH drive into an HP ProLiant Gen 6 or Gen 7 server using the included Smart Carrier?

Slide the drive into the Smart Carrier tray until it clicks, then insert the carrier into the hot-plug bay until the latch engages; the carrier handle must be fully closed for the SAS connector to seat properly.

What maintenance or replacement will the EG0600FBLSH need during its service life?

Mechanical 10000RPM drives accumulate wear; plan to replace the EG0600FBLSH after the rated duty cycle or if SMART reallocated-sector counts rise, and keep a spare 600GB SAS unit on hand.

Which limit appears first when the EG0600FBLSH runs sustained workloads in a Gen 6 or Gen 7 server?

The 6Gb/s SAS interface caps sustained throughput, so sequential transfers plateau at the bus ceiling before the 10000RPM platters reach their own throughput ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.