HPE
HPE BL460c G10 blade server 2x Xeon Platinum 8158 32GB DDR4 2x 300GB SAS
Blade server with dual Xeon Platinum 8158 CPUs, 32 GB DDR4 memory and two 300 GB SAS drives
- TypeBlade
- CPU TypeIntel Xeon
- CPU Speed3 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size32GB
- Dual Xeon Platinum 8158 CPUs deliver 24 cores at 3.0 GHz
- 32GB DDR4 ECC registered memory supports up to 128GB capacity
- 2x 300GB 10K SAS drives provide fast enterprise storage
- Smart Array P204i-b SR Gen10 controller enables hardware RAID
- Integrated iLO Advanced remote management with FlexFabric 20GB networking
Blade density for virtualised workloads
The HPE BL460c G10 blade server fits two Xeon Platinum 8158 processors, each with 12 cores at 3.0 GHz, into a half-height form factor. Thirty-two gigabytes of DDR4 ECC registered memory support dense virtualisation or container clusters. Two 300 GB 10K SAS drives connect through a Smart Array P204i-b SR controller for local OS or scratch space.
Thermals and power in a shared enclosure
Cooling and power are supplied by the c-Class enclosure, so the blade itself adds no standalone fans or power supplies. The integrated 20 Gb FlexFabric adapter handles network traffic without extra PCIe cards, keeping slot count and cable bulk low. iLO Advanced remote management runs independently of the host operating system for out-of-band control.
Half-height constraint and enclosure dependence
The half-height 2.5-inch drive bays limit internal storage to two devices, so large local data sets need external arrays. Full enclosure infrastructure — power, cooling, interconnects — is mandatory; the blade cannot operate on a bench. Buyers who need more than two internal drives or standalone rack-mount operation should look at full-height or rack servers instead.
Highlights
- Dual Xeon Platinum 8158 CPUs deliver 24 cores at 3.0 GHz
- 32GB DDR4 ECC registered memory supports up to 128GB capacity
- 2x 300GB 10K SAS drives provide fast enterprise storage
- Smart Array P204i-b SR Gen10 controller enables hardware RAID
- Integrated iLO Advanced remote management with FlexFabric 20GB networking
Specifications
| Brand | HP |
|---|---|
| Series | Proliant BL |
| Model | Blade |
| Type | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 3 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 32GB |
| Memory Type | DDR4 SDRAM |
| Max Memory Capacity | 128GB |
| Hard Drive (Installed) | 600,00 |
| Storage Controller | HP Smart Array P204i-b SR Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | Integrated Lights-Out (iLO) Advanced |
| Dimensions | 22 x 22x 10 in |
| Weight | 20 |
Questions about this item
How is the BL460c G10 installed into a c-Class enclosure and what alignment step is often missed?
Slide the blade along the enclosure guide rails until the multi-pin connector seats firmly; the most common error is stopping before the latch clicks, which leaves the power and data planes unconnected.
Which components in this BL460c G10 will need replacement first during its service life?
The two 300 GB 10 K SAS drives are the primary wear items; mechanical disks typically require replacement before the Xeon 8158 processors, DDR4 memory or the P204i-b controller.
What limit appears first when the BL460c G10 runs a sustained all-core workload?
The enclosure shared 12 V power budget and cooling capacity are reached before the dual Xeon 8158 processors hit their maximum frequency, so performance stabilises at the chassis level rather than the silicon level.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



