HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7540 8-Port NVMe RAID AIC
$1,749.99
0.02223226BTC
In stock
HPE
HPE DL380 Gen9 4LFF 2x Xeon E5-2637 v4 768GB DDR4 rack server
Rack-mount server with dual 3.5 GHz Xeon processors, 768 GB DDR4 ECC memory, P440 SAS controller and four 3.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed3.5GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual 3.5 GHz Xeon processors deliver high single-thread speed
- 768 GB DDR4 ECC memory supports large virtualised workloads
- HPE Smart Array P440 SAS controller enables flexible RAID storage
- Integrated iLO Advanced remote management simplifies lights-out administration
- Four 3.5-inch drive bays ready for SATA or SAS expansion
HPE DL380 Gen9 4LFF 768GB DDR4 Server
This HPE ProLiant DL380 Gen9 rack server arrives with two Intel Xeon E5-2637 v4 processors at 3.5GHz and 768GB of DDR4 ECC registered memory. The 4LFF chassis supports up to four 3.5-inch SATA drives managed by an HPE Smart Array P440 SAS controller. Remote management is handled through HPE iLO Advanced and dual 500W power supplies are installed.
Suits virtualisation hosts needing large memory
The 768GB DDR4 configuration suits virtualisation hosts, database servers or compute clusters that benefit from high core-count Xeon processors and large memory footprints. Buyers who require more than four drive bays, a different drive interface or a newer processor architecture should consider other platforms. The integrated graphics and 1GbE networking limit GPU-accelerated or high-throughput network workloads.
768GB DDR4 ECC registered memory capacity
The installed 768GB of DDR4 ECC registered memory is the decisive specification for this system. It determines the maximum virtual machine density, in-memory database size or compute throughput the server can deliver. The chassis supports a maximum of 3TB across all slots, so this configuration leaves room for future expansion if the workload grows.
Highlights
- Dual 3.5 GHz Xeon processors deliver high single-thread speed
- 768 GB DDR4 ECC memory supports large virtualised workloads
- HPE Smart Array P440 SAS controller enables flexible RAID storage
- Integrated iLO Advanced remote management simplifies lights-out administration
- Four 3.5-inch drive bays ready for SATA or SAS expansion
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 3.5GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 20,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What DDR4 memory modules must I already own to expand beyond the installed 768 GB?
The server uses DDR4 ECC registered DIMMs; maximum supported capacity is 3 TB across the available slots.
Can the P440 SAS controller manage SATA drives I keep from an older array?
Yes, the HPE Smart Array P440 supports both SAS and SATA drives in the 3.5" LFF bays.
How do I verify the iLO remote management is active after first power-on?
Connect the dedicated iLO network port; the interface will display the firmware version and system health status once an IP address is assigned.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7502 2-Port M.2 NVMe RAID Controller
$708.99
0.00900717BTC
In stock
