HPE
HPE DL380 Gen9 8SFF 2x Xeon E5-2637 v4 768GB DDR4 rack server
Rack server with dual 3.5GHz Xeon processors, 768GB DDR4 memory, eight 2.5-inch drive bays and P440 SAS controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed3.5GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual 3.5 GHz Xeon processors deliver high single-thread speed
- 768 GB DDR4 ECC memory supports large virtualisation workloads
- Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage
- Integrated iLO Advanced provides full remote server management
- Redundant 500 W power supplies keep the system running during a failure
Rack server with dual Xeon processors
The HPE DL380 Gen9 is a 2U rackmount server populated with two Intel Xeon E5-2637 v4 CPUs running at 3.5GHz. It arrives with 768GB of DDR4 ECC registered memory already installed across the available slots. The chassis provides eight 2.5-inch SFF drive bays and includes an HPE Smart Array P440 SAS controller with 2GB flash-backed write cache. Remote management is handled by HPE iLO Advanced for out-of-band access.
Suited for memory-heavy workloads.
This configuration targets workloads that benefit from large memory capacity and strong single-thread performance, such as in-memory databases or virtualisation hosts with high consolidation ratios. Each processor delivers four cores, so buyers who need high thread counts for rendering or heavy parallel compute should look elsewhere. The system ships without any drives installed, so storage must be provisioned separately.
Memory capacity of 768GB DDR4
The installed 768GB of DDR4 ECC registered memory is the defining specification for this unit. It determines the maximum dataset size that can be kept in RAM and the number of virtual machines that can be consolidated on the host. Buyers must verify that their application licensing and OS support this memory footprint before purchase.
Highlights
- Dual 3.5 GHz Xeon processors deliver high single-thread speed
- 768 GB DDR4 ECC memory supports large virtualisation workloads
- Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage
- Integrated iLO Advanced provides full remote server management
- Redundant 500 W power supplies keep the system running during a failure
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 3.5GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 600,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the Xeon E5-2637 v4 processors and what step is often missed?
Align the notches on the CPU with the socket keys, lower the retention lever fully, then apply thermal paste before seating the heatsink; skipping the paste causes immediate overheating.
What maintenance will the 768GB DDR4 memory require over time?
The ECC registered DDR4 modules need no scheduled replacement; run the iLO memory test annually and reseat any DIMM that logs correctable errors.
Which limit appears first when the P440 SAS controller runs sustained workloads?
The controller cache battery reaches end-of-life after roughly three years, disabling write-back caching until the battery module is swapped.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



