We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HPE ML350 Gen9 tower server, silver front bezel, eight 2.5 inch drive bays

HPE

HPE ML350 Gen9 8SFF 2x Xeon E5-2667 v4 384GB DDR4 rack server

SKU CH-ATM9-J4V4X

Rack server with dual Xeon E5-2667 v4 processors, 384GB DDR4 ECC memory and a P440 SAS controller for up to eight 2.5-inch drives

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed3.2GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual 3.2 GHz Xeon processors handle demanding workloads
  • 384 GB DDR4 ECC memory supports large datasets
  • Eight 2.5-inch SAS bays allow flexible storage
  • HPE iLO Advanced enables remote server management
  • P440 RAID controller provides hardware data protection

Dual-socket Xeon tower server

The HPE ML350 Gen9 chassis arrives as a rack-mountable tower server fitted with two Xeon E5-2667 v4 processors running at 3.2 GHz. Thirty-two cores and 384 GB of DDR4 ECC registered memory provide a ready-to-run platform for virtualisation, database or compute workloads. The eight 2.5-inch small-form-factor bays are empty so you can populate them with SAS drives that match your capacity and redundancy plan.

Verify power and drive compatibility

Confirm that your rack supplies two 500 W flex-slot power supplies and that the P440 SAS controller supports the drive mix you intend to install. The integrated Intel I350 and X540 network card delivers two 10 GbE and two 1 GbE ports, so check cabling and switch ports before deployment. Remote management relies on HPE iLO Advanced, which requires a dedicated management network segment.

Sustained load behaviour

Under continuous multi-threaded load the dual 8-core CPUs maintain their 3.2 GHz base frequency while the P440 controller manages RAID parity calculations without a separate cache module. The 384 GB memory ceiling leaves headroom for 1 536 GB maximum expansion if workloads grow. Thermal design targets steady-state operation in a standard rack airflow rather than short burst performance.

Highlights

  • Dual 3.2 GHz Xeon processors handle demanding workloads
  • 384 GB DDR4 ECC memory supports large datasets
  • Eight 2.5-inch SAS bays allow flexible storage
  • HPE iLO Advanced enables remote server management
  • P440 RAID controller provides hardware data protection

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed3.2GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity1536GB
Hard Drive (Installed)4,80
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What components are included and what must I purchase separately?

The server ships with two Xeon E5-2667 v4 processors, 384 GB DDR4 ECC registered memory, a P440 SAS RAID controller, an Intel I350/X540 quad-port network card, and two 500 W Flex Slot power supplies. Drives and rail kit are not installed.

Which memory capacity should I choose for this configuration?

This unit already has 384 GB DDR4 installed and supports a maximum of 1536 GB, so additional modules can be added later if workloads grow.

What does the 3.2 GHz clock speed mean for actual performance?

Each of the two 8-core Xeon E5-2667 v4 CPUs runs at a base frequency of 3.2 GHz with 25 MB cache, delivering strong single-thread and multi-thread throughput for database and virtualization workloads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.