HPE
HPE ProLiant DL360 Gen9 8SFF 2x Xeon E5-2640 v3 384GB DDR4 rack server
1U rack server with two 2.6 GHz Xeon CPUs, 384 GB DDR4 ECC memory, P440 SAS controller, dual 10 GbE and 1 GbE ports, and eight 2.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.6GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon E5-2640 v3 CPUs provide 20 MB cache at 2.6 GHz
- 384 GB DDR4 ECC memory installed with capacity up to 768 GB
- HPE Smart Array P440 SAS controller supports eight 2.5-inch drive bays
- HPE iLO Advanced enables remote server management
- Dual 500 W Flex Slot power supplies deliver redundant power
Dense compute in 1U
This HPE ProLiant DL360 Gen9 packs two Xeon E5-2640 v3 processors at 2.6 GHz and 384 GB of DDR4 ECC registered memory into a single rack unit. The 8SFF chassis supports up to eight 2.5-inch drives backed by an HPE Smart Array P440 SAS controller. Integrated graphics handle basic console output while dual 500 W flex-slot power supplies provide redundancy.
Virtualisation hosts and memory-bound databases
The 384 GB DDR4 capacity suits dense virtual-machine consolidation, in-memory analytics or legacy workloads that scale vertically rather than horizontally. Eight drive bays give room for local OS mirrors or scratch space. Buyers who want more storage bays or a newer instruction set should look at a larger chassis or a later generation.
Memory ceiling
Maximum supported memory is 768 GB DDR4, so the installed 384 GB leaves headroom for future expansion without replacing modules. The P440 controller manages SAS and SATA drives through the eight front bays. iLO Advanced enables remote firmware updates and power control from any location.
Highlights
- Dual Xeon E5-2640 v3 CPUs provide 20 MB cache at 2.6 GHz
- 384 GB DDR4 ECC memory installed with capacity up to 768 GB
- HPE Smart Array P440 SAS controller supports eight 2.5-inch drive bays
- HPE iLO Advanced enables remote server management
- Dual 500 W Flex Slot power supplies deliver redundant power
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.6GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How much additional DDR4 memory can I add beyond the 384 GB already installed?
The board supports up to 768 GB total, so another 384 GB of DDR4 ECC Registered modules can be fitted.
Which component is likely to throttle first when both Xeon E5-2640 v3 CPUs run at 2.6 GHz continuously?
The two 500 W Flex Slot power supplies set the sustained power ceiling; prolonged full-load operation will hit that limit before the CPUs reach thermal throttling.
How loud are the fans when the server runs 24/7 with the P440 controller and dual 10 GbE ports active?
The 1U chassis uses high-speed fans that stay at elevated RPM under constant load, producing noticeable datacentre-level noise unsuitable for quiet office spaces.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



