We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount server chassis with front drive bays

HPE

HPE ProLiant DL380 Gen10 1x Xeon Gold 5120 2.2GHz 256GB DDR4 No Drive rack server

SKU CH-N9PX-1HK45

Rack server with one 14-core 2.2GHz Xeon Gold 5120 processor, 256GB DDR4 ECC memory, Smart Array P408 SAS controller and dual 500W power supplies

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size256GB
  • 14-core Xeon Gold 5120 at 2.2 GHz for demanding workloads
  • 256 GB DDR4 ECC registered memory for large datasets
  • HPE Smart Array P408 SAS controller enables flexible RAID arrays
  • Dual 500 W Flex Slot power supplies provide redundancy
  • HPE iLO Advanced remote management simplifies administration

ProLiant DL380 Gen10 1U rack server

The HPE ProLiant DL380 Gen10 is a 2U rackmount server system designed for data centre workloads. It arrives with a single Intel Xeon Gold 5120 processor running at 2.2GHz with 14 cores and 19.25 MB cache. The system includes 256GB of DDR4 ECC registered memory and an HPE Smart Array P408 SAS storage controller. No drives are installed, allowing custom storage configuration.

Suits virtualisation hosts needing max two CPUs

This configuration fits buyers who need a dual-socket capable platform with high memory capacity and integrated 10GbE networking. It is not for buyers who require populated drive bays, a second processor installed, or GPU acceleration beyond integrated graphics. Organisations needing different drive counts or controller options should request a custom build.

256GB DDR4 ECC memory decides fit

The installed 256GB DDR4 ECC registered memory occupies DIMM slots and sets the starting capacity for virtualisation density. Maximum supported capacity reaches 3TB across both processors. If the workload demands more memory than 256GB immediately, additional modules must be sourced separately to match the registered DDR4 specification.

Highlights

  • 14-core Xeon Gold 5120 at 2.2 GHz for demanding workloads
  • 256 GB DDR4 ECC registered memory for large datasets
  • HPE Smart Array P408 SAS controller enables flexible RAID arrays
  • Dual 500 W Flex Slot power supplies provide redundancy
  • HPE iLO Advanced remote management simplifies administration

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)2,40
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What rack depth and width does the DL380 Gen10 chassis require?

The chassis measures 36 inches deep by 24 inches wide and fits a standard 19-inch rack.

How is the Smart Array P408 controller installed, and what step is often missed?

The P408 controller mounts in a dedicated PCIe slot; the step often missed is connecting the SAS cables from the backplane to the controller ports before powering on.

When will the 500 W Flex Slot power supplies need replacement?

Replace the 500 W Flex Slot power supplies if a unit fails or after several years of continuous operation; each supply is hot-pluggable for zero-downtime swap.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.