HPE
HPE ProLiant DL380 Gen9 4LFF 2x Xeon E5-2687W v4 512GB DDR4
Dual 12-core Xeon 3.0 GHz server with 512GB DDR4 ECC memory, P440 SAS controller and four 3.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed3 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual 12-core Xeon processors at 3.0 GHz deliver high multi-thread throughput
- 512GB DDR4 ECC memory supports large virtualisation workloads
- HPE Smart Array P440 SAS controller enables flexible RAID storage
- 4LFF chassis accepts 3.5-inch SATA drives up to 2000 GB each
- HPE iLO Advanced remote management simplifies server administration
HPE DL380 Gen9 4LFF dual Xeon server
This HPE ProLiant DL380 Gen9 rack server ships with two Intel Xeon E5-2687W v4 processors running at 3.0 GHz, each providing 12 cores and 30 MB cache. The system includes 512 GB of DDR4 ECC registered memory and an HPE Smart Array P440 SAS controller. It is built for organisations that need a dense 4-bay 3.5-inch chassis with high core counts and large memory capacity.
Four 3.5-inch drive bays with SAS and SATA support
The 4LFF chassis accepts up to four 3.5-inch drives using SATA or SAS interfaces through the P440 controller. No drives are installed, so storage capacity and RAID level must be chosen separately. The two 500 W Flex Slot power supplies provide redundancy for the configured components. Network connectivity is supplied by a 1 Gb two-port 332T adapter.
Tool-less rails and iLO simplify deployment
The server supports tool-less rail mounting in standard racks, and HPE iLO Advanced remote management allows firmware updates and health monitoring before the operating system loads. Memory population rules for the 512 GB configuration must be followed to avoid boot failures. Drive caddies are required for any 3.5-inch drives and are not included.
Highlights
- Dual 12-core Xeon processors at 3.0 GHz deliver high multi-thread throughput
- 512GB DDR4 ECC memory supports large virtualisation workloads
- HPE Smart Array P440 SAS controller enables flexible RAID storage
- 4LFF chassis accepts 3.5-inch SATA drives up to 2000 GB each
- HPE iLO Advanced remote management simplifies server administration
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 3 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 20,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
Should I choose the 4 LFF 3.5-inch bay chassis or a different drive-count model?
This unit is the 4 LFF chassis that accepts up to four 3.5-inch SATA drives; other bay counts are not offered in this listing.
What does the 3.0 GHz figure mean once the server is running workloads?
Each of the two Xeon E5-2687W v4 processors runs at 3.0 GHz base frequency across 12 cores, giving 24 cores total for compute tasks.
How does the SAS controller limit the storage interface in practice?
The P440 SAS controller manages the four 3.5-inch bays over SATA, so installed drives operate at SATA speeds rather than SAS speeds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



