HPE
HPE ProLiant ML350 Gen10 8SFF rack server 2x Xeon Silver 4214 512GB DDR4
A rack server with dual 2.2 GHz Xeon Silver 4214 processors, 512 GB DDR4 ECC memory, a Smart Array P408 SAS controller and eight 2.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual Xeon Silver 4214 CPUs deliver 24 cores at 2.2GHz for demanding workloads
- 512GB DDR4 ECC registered memory supports large datasets and virtualisation
- HPE Smart Array P408 SAS controller enables flexible RAID storage configurations
- Integrated iLO Advanced remote management simplifies server administration from anywhere
- 8SFF 2.5-inch drive bays provide high-density storage capacity in a rack form factor
Dual Xeon Silver 4214 Rack Server
This HPE ProLiant ML350 Gen10 arrives new with two Intel Xeon Silver 4214 processors at 2.2GHz and 512GB of DDR4 ECC registered memory. The 8SFF chassis supports up to eight 2.5-inch drives through an HPE Smart Array P408 SAS controller. Dual 500W Flex Slot power supplies and iLO Advanced remote management are included.
Suited For Virtualisation Hosts Not For Dense GPU
Organisations consolidating virtual machines or running memory-heavy databases will benefit from the 24 total cores and half-terabyte RAM ceiling. The 8SFF bay count and lack of dedicated GPU slots make it a poor fit for render farms, AI training or VDI deployments that need accelerator cards.
512GB DDR4 ECC Registered Memory Decides Fit
The installed 512GB DDR4 ECC registered capacity is the primary constraint for buyers. Workloads that fit comfortably inside this footprint will run without further investment; larger datasets require populating additional DIMM slots up to the 3TB maximum before deployment.
Highlights
- Dual Xeon Silver 4214 CPUs deliver 24 cores at 2.2GHz for demanding workloads
- 512GB DDR4 ECC registered memory supports large datasets and virtualisation
- HPE Smart Array P408 SAS controller enables flexible RAID storage configurations
- Integrated iLO Advanced remote management simplifies server administration from anywhere
- 8SFF 2.5-inch drive bays provide high-density storage capacity in a rack form factor
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 16,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What chassis and drive-bay configuration does this ML350 Gen10 need to accept the eight 2.5-inch bays listed?
It requires the 8SFF chassis variant, which provides eight 2.5-inch hot-plug bays wired to the Smart Array P408 controller.
Will the installed Smart Array P408 controller manage both new SAS drives and older SATA drives I might reuse?
Yes, the P408 supports mixed SAS and SATA drives on the same backplane, so existing SATA drives can be used alongside newer SAS units.
How can I confirm the dual Xeon Silver 4214 processors and 512 GB DDR4 are recognised and healthy after first boot?
Open the iLO web interface; the System Health page shows two 2.2 GHz 12-core CPUs, 512 GB DDR4 ECC Registered memory, and clean POST results.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



