HPE
HPE ProLiant ML350 Gen9 8SFF 2x Xeon E5-2650 v3 2.3GHz 192GB DDR4 No Drive Rack Server
Dual Xeon E5-2650 v3 at 2.3GHz with 192GB DDR4 and P440 SAS controller in an 8-bay 2.5-inch chassis
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.3GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size192GB
- Dual 10-core Xeon 2.3GHz processors deliver high multi-thread throughput
- 192GB DDR4 ECC registered memory supports large virtualisation workloads
- Smart Array P440 SAS controller provides hardware RAID flexibility
- Eight 2.5-inch drive bays allow dense storage expansion
- Dual 500W Flex Slot power supplies add redundant power protection
Dual Xeon E5-2650 v3 Server
The HPE ProLiant ML350 Gen9 is a rack-mount server system built for compute-intensive workloads. It ships with two Intel Xeon E5-2650 v3 processors, each running at 2.3 GHz with ten cores and 25 MB cache. A total of 192 GB DDR4 ECC registered memory is installed across the available slots. The chassis provides eight 2.5-inch drive bays and includes an HPE Smart Array P440 SAS controller for storage management.
Suits virtualisation hosts; not for GPU compute
This configuration suits organisations consolidating virtual machines, running databases or hosting business applications that benefit from twenty cores and large memory capacity. The integrated graphics and lack of installed drives mean it is not for GPU-accelerated rendering, high-performance visualisation or deployments requiring immediate storage capacity. Buyers needing more than two processors or a different memory ceiling should evaluate alternative platforms.
Max memory 1536 GB DDR4
The system board supports a maximum of 1536 GB DDR4 memory, defining the upper limit for future expansion. The current 192 GB configuration uses registered ECC modules compatible with the dual-processor architecture. Two 500 W Flex Slot power supplies provide redundancy. Remote management is handled through HPE iLO Advanced, and networking includes two 10 GbE and two 1 GbE ports via Intel I350/X540 adapters.
Highlights
- Dual 10-core Xeon 2.3GHz processors deliver high multi-thread throughput
- 192GB DDR4 ECC registered memory supports large virtualisation workloads
- Smart Array P440 SAS controller provides hardware RAID flexibility
- Eight 2.5-inch drive bays allow dense storage expansion
- Dual 500W Flex Slot power supplies add redundant power protection
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.3GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 192GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1536GB |
| Hard Drive (Installed) | 1.200,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the 2.5-inch drives into the 8SFF chassis, and which step is often missed?
Slide each drive into a bay until the latch clicks, then attach the SAS cables to the P440 controller; the step often missed is securing the cable routing clips so airflow is not blocked.
What maintenance will the 2x 500W Flex Slot power supplies need later?
The hot-plug power supplies are rated for continuous operation; plan to replace them after several years or if a fault LED lights, and clean the front dust filters every few months.
What limit appears first when both Xeon E5-2650 v3 CPUs run at 2.3GHz under sustained load?
The 500W power supply capacity and chassis thermal envelope are the first constraints; monitor iLO power readings to avoid throttling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



