We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

KHACHIMO

KHACHIMO Vapel PPC12 A017 ATX power supply

SKU CH-ZZPG-P92T8

ATX power supply tested working, listed by the manufacturer in March 2024

  • TypeATX
  • ATX form factor fits standard desktop cases
  • Tested working so it powers on reliably
  • Good quality components support stable operation
  • Switching design converts power efficiently
  • First listed by manufacturer in March 2024

ATX power supply for desktop builds

The KHACHIMO Vapel PPC12 A017 is an ATX power supply designed for desktop computer builds. It provides the standard connections required by typical motherboards, processors and graphics cards. The unit is supplied new and has been tested to confirm it is working. It suits builders assembling a replacement or a new system that uses the ATX form factor.

Replacing older or failed ATX units

This supply replaces an existing ATX power supply that has failed, become noisy or can no longer support the installed components. The jump is worth it when the current unit cannot deliver stable power to the CPU and GPU under load. Builders moving from a lower-wattage or non-standard unit gain the ATX connector layout and the reliability of a tested unit.

Limits of the ATX interface

The ATX interface defines the physical connector shapes and the voltage rails delivered to the motherboard and peripherals. It does not dictate the maximum continuous power available on each rail, so the actual output capability depends on the internal design of this specific model. Cable lengths and the number of peripheral connectors are also fixed by this unit and cannot be changed without adapters.

Highlights

  • ATX form factor fits standard desktop cases
  • Tested working so it powers on reliably
  • Good quality components support stable operation
  • Switching design converts power efficiently
  • First listed by manufacturer in March 2024

Specifications

TypeATX

Questions about this item

What ATX case clearance does the PPC12 A017 require?

The PPC12 A017 follows the standard ATX form factor, so it fits any chassis with an ATX power-supply bay.

Which cables must be connected first when installing the PPC12 A017, and what step do builders often miss?

Seat the 24-pin motherboard and 4/8-pin CPU connectors fully before routing peripheral cables; the common miss is leaving the CPU power plug loose.

When should the internal fan of the PPC12 A017 be cleaned or the unit replaced?

Clean the fan intake every 12 months; replace the supply if voltages drift, the fan becomes noisy or the unit reaches end of life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.