Kingston Technology Corp. KF564C32RSAK2-32 Fury Renegade RGB 32GB (2 x 16GB) DDR5 6400 CL32
- 32GB (2 x 16GB)
- 288-Pin PC RAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Kingston Technology Corp.
A 64 GB dual-channel DDR5 kit running at 6000 MT/s with CL30 latency, white heat spreaders and RGB lighting
Capacity 64GB (2 x 32GB)
Speed DDR5 6000 (PC5 48000)
CAS Latency|Color|LED Color CL30|White|RGB
This 64 GB kit contains two 32 GB DDR5 modules rated at 6000 MT/s with CL30 timing. White heat spreaders and RGB lighting suit showcase builds. Intel XMP 3.0 and AMD EXPO profiles are both programmed on the SPD. The modules operate at 1.40 V for the rated speed.
AMD Ryzen 6000-series and Intel 600/700-series chipsets can load the EXPO or XMP profile for 6000 MT/s. Builds staying at JEDEC 4800 MT/s will not need the higher voltage. Systems limited to lower memory speeds or tighter clearances should consider other kits.
The rated 30-36-36 timing at 1.40 V is the specification that determines whether the memory runs at 6000 MT/s. Motherboards that cannot supply 1.40 V or validate CL30 will fall back to 4800 MT/s at 1.1 V. Verify the board QVL before purchase.
| Brand | Kingston |
|---|---|
| Series | FURY Beast |
| Model | KF560C30BWEAK2-64 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL30 |
| Timing | 30-36-36 |
| Voltage | 1.40V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 and AMD EXPO |
| Color | White |
| Heat Spreader | Yes |
| Features | Kingston FURY KF560C30BWEAK2-64 is a kit of two 2G x 64-bit (16GB) DDR5-6000 CL36 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports AMD® EXPO v1.0 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 32GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 36-38-38 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. |
| Recommend Use | AMD & Intel Compatible / AMD 600 Series / AMD B650 / AMD Ryzen Compatible / High Performance or Gaming Memory / Intel 600 Series / Intel 700 Series / Intel B660 / Intel B670 / Intel B760 / Intel Compatible / Intel Z690 / Intel Z790 |
| LED Color | RGB |
| Shipping weight | 0.09 kg |
| Package size | 169 × 121 × 15 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The modules support AMD EXPO 1.0, so a B650 board with a Ryzen processor can load the 6000 MT/s profile directly from the SPD.
The XMP 3.0 and EXPO profiles set 1.40 V automatically when enabled; no manual voltage adjustment is required.
The heat spreader adds only a few millimetres above the PCB, so most tower coolers that clear standard-height DIMMs will fit without interference.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?