Kingston Technology Corp. KSM56R46BD4PMI-64MDI 64GB DDR5 5600 CL46 Registered Server RAM
- 64GB
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Kingston Technology Corp.
A 96 GB DDR5-5600 registered ECC RDIMM with CL46 latency for high-capacity server workloads
Option Micron, Full Lock
This 96GB DDR5-5600 CL46 ECC Registered RDIMM uses Micron components in a 2Rx4 layout. It runs at 5600 MHz with 46-45-45 timings at 1.10V on a 288-pin interface. The module targets enterprise servers and workstations that require high-capacity, error-correcting memory for virtualisation, databases or compute clusters.
Buyers whose systems accept only unbuffered UDIMMs cannot use this module. Builds limited to lower single-module capacities should look at smaller RDIMMs. Workstations without ECC support in the CPU or chipset will not benefit from the error-correction feature.
Align the key notch with the slot and press until the latches click; no heat spreader means tight clearance is rarely an issue. Common problems include mixing registered and unbuffered DIMMs, populating slots in the wrong order for the memory controller, or running the module on a board that does not support DDR5-5600 registered operation.
| Brand | Kingston |
|---|---|
| Model | KSM56R46BD4PMI-96MBI |
| Capacity | 96GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Timing | 46-45-45 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Micron Chipset |
| Heat Spreader | No |
| Features | Kingston's KSM56R46BD4PMI-96MBI is a 12G x 80-bit (96GB) DDR5-5600 CL46 SDRAM (Synchronous DRAM), 2Rx4, ECC, memory module, based on forty 6G x 4-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR5-5600 timing of 46-45-45 at 1.1V. |
| Shipping weight | 0.14 kg |
| Package size | 142 × 43 × 8 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The module is a 288-pin DDR5 RDIMM rated for DDR5-5600 (PC5-44800) at 1.10 V. It requires a DDR5-compatible motherboard with registered-DIMM support and ECC enabled in the BIOS.
Mixing speeds will force all modules to run at the lowest common speed and timing; the 5600 MHz module will downclock to match 4800 MHz, and registered/ECC settings must be identical across every slot.
Check the BIOS memory-info screen or a tool such as CPU-Z: it should show DDR5-5600, CAS 46, timings 46-45-45, voltage 1.10 V, ECC active and registered mode enabled.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?