SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.004997BTC
In stock
Kingston Technology Corp.
Kingston Technology Corp. KVR1333D3N9K4/32G 32GB (4 x 8GB) DDR3 1333 server RAM
32 GB unbuffered DDR3 kit with four 8 GB modules running at 1333 MHz and CL9 latency
- Capacity32GB (4 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333
- CAS LatencyCL9
- Voltage1.50V
- ECCNo
- 32 GB total capacity across four 8 GB modules
- DDR3 1333 speed with CL9 latency for responsive server operation
- Unbuffered design installs directly into standard 240-pin DDR3 slots
- 50 V operating voltage matches common DDR3 platform requirements
- Non-ECC configuration suited for workloads that do not require error correction
32GB DDR3 1333 server kit
This kit supplies 32GB of DDR3 memory in four 8GB unbuffered modules running at 1333MHz with CL9 latency. It targets administrators upgrading or repairing legacy servers that require 240-pin DDR3 SDRAM at 1.50V without ECC.
Thermals and power draw
Operating at the standard 1.50V DDR3 voltage, the modules draw typical power for this generation and speed. Unbuffered designs place no extra load on the memory controller, so thermal output remains comparable to other DDR3 1333 DIMMs under normal server workloads.
What the four-module kit changes
Populating four slots at once lets the memory controller run in its optimal multi-channel configuration where the platform supports it. The matched 8GB sticks simplify installation and reduce the risk of timing mismatches that can occur when mixing modules of different capacities or latencies.
Highlights
- 32 GB total capacity across four 8 GB modules
- DDR3 1333 speed with CL9 latency for responsive server operation
- Unbuffered design installs directly into standard 240-pin DDR3 slots
- 50 V operating voltage matches common DDR3 platform requirements
- Non-ECC configuration suited for workloads that do not require error correction
Specifications
| Brand | Kingston |
|---|---|
| Model | KVR1333D3N9K4/32G |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Shipping weight | 0.07 kg |
| Package size | 160 × 104 × 51 mm |
Questions about this item
How do I install the four 8 GB 240-Pin DDR3 1333 modules in a server board?
Power down the server, open the chassis, align each module's notch with the DIMM slot key, press firmly until the retention clips click on both sides, then populate all four slots for the full 32 GB capacity.
What maintenance or replacement will this unbuffered DDR3 kit need over time?
No routine maintenance is required; if a module fails it must be replaced with an identical 8 GB DDR3 1333 CL9 1.50 V unbuffered stick to keep the kit matched.
What limit appears first when the memory runs at 1333 MT/s under sustained load?
The CL9 latency at 1.50 V sets the timing ceiling; sustained throughput cannot exceed the DDR3 1333 data rate regardless of workload duration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
