BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Kingston Technology Corp.
32 GB unbuffered DDR3 kit with four 8 GB modules running at 1333 MHz and CL9 latency
This kit supplies 32GB of DDR3 memory in four 8GB unbuffered modules running at 1333MHz with CL9 latency. It targets administrators upgrading or repairing legacy servers that require 240-pin DDR3 SDRAM at 1.50V without ECC.
Operating at the standard 1.50V DDR3 voltage, the modules draw typical power for this generation and speed. Unbuffered designs place no extra load on the memory controller, so thermal output remains comparable to other DDR3 1333 DIMMs under normal server workloads.
Populating four slots at once lets the memory controller run in its optimal multi-channel configuration where the platform supports it. The matched 8GB sticks simplify installation and reduce the risk of timing mismatches that can occur when mixing modules of different capacities or latencies.
| Brand | Kingston |
|---|---|
| Model | KVR1333D3N9K4/32G |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| 出貨重量 | 0.07 kg |
| 包裝尺寸 | 160 × 104 × 51 mm |
Power down the server, open the chassis, align each module's notch with the DIMM slot key, press firmly until the retention clips click on both sides, then populate all four slots for the full 32 GB capacity.
No routine maintenance is required; if a module fails it must be replaced with an identical 8 GB DDR3 1333 CL9 1.50 V unbuffered stick to keep the kit matched.
The CL9 latency at 1.50 V sets the timing ceiling; sustained throughput cannot exceed the DDR3 1333 data rate regardless of workload duration.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?