Kingston Technology Corp. SEDC600M/480G 480 GB enterprise SSD
- 2.5"
- 480GB
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Kingston Technology Corp.
A 2.5-inch SATA enterprise SSD with 960 GB capacity, 256-bit AES encryption and 1 DWPD endurance for mixed-use server workloads
The Kingston SEDC600M/960G is a 960 GB 2.5-inch SATA III solid-state drive built for server and storage arrays. It uses 3D TLC NAND and includes hardware-based power loss protection plus 256-bit AES self-encryption. The drive targets mixed read-write environments that demand consistent latency and data integrity.
Endurance is specified at one full drive write per day over five years, totalling 1752 terabytes written. This figure determines whether the drive suits your write-intensive application profile. Workloads that exceed this daily write volume will require a higher endurance tier.
Sequential throughput reaches up to 560 MBps read and 530 MBps write while random 4 KB performance delivers up to 94,000 read IOPS and 65,000 write IOPS. Average active power stays at 1.45 W with peaks of 3.6 W during write bursts. The drive operates continuously from 0 °C to 70 °C and carries a 2,000,000-hour MTBF rating.
| Brand | Kingston |
|---|---|
| Model | SEDC600M/960G |
| Form Factor | 2.5" |
| Capacity | 960GB |
| Memory Components | 3D TLC |
| Interface | SATA III |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 530 MBps |
| 4KB Random Read | Up to 94,000 IOPS |
| 4KB Random Write | Up to 65,000 IOPS |
| Read Latency | <130 µs |
| Write Latency | <70 us |
| Endurance | 1 DWPD |
| Terabytes Written (TBW) | 1752TB |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 1.30W |
| Power Consumption (Active) | Average: 1.45W Max Read: 1.6W Max Write: 3.6W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Vibration Resistance | 2.17G Peak (7-800Hz) operating 20G Peak (10-2000Hz) non-operating |
| Height | 7mm |
| Width | 100mm |
| Depth | 69.9mm |
| Weight | 92.34g |
| Shipping weight | 0.09 kg |
| Package size | 184 × 131 × 8 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The 560 MB/s sequential read is the SATA 6 Gb/s interface limit; real workloads will hit that ceiling on large-block transfers but random reads top out at 94,000 IOPS.
The 600 MB/s bus ceiling limits sequential reads to 560 MB/s and writes to 530 MB/s; latency stays below 130 µs read and 70 µs write.
A standard 2.5-inch drive bay with SATA data and power connectors; the drive draws up to 3.6 W during writes and operates from 0 °C to 70 °C.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?