We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black vertical dual-bay SAS SATA drive enclosure with USB-C cable and power adapter

MAIWO

MAIWO K3082ASAS SAS SATA Drive Enclosure

SKU CH-PMJX-F1VQF

Dual-bay SAS/SATA dock clones drives offline or connects both to USB-C at 5 Gbps with 48 TB total capacity

  • ColorBlack
  • Size2.5" & 3.5"
  • AC AdapterYes
  • MaterialClassic Plastic
  • Internal InterfaceSAS / SATA
  • External InterfaceUSB C
  • Dual-bay design accepts 2.5 and 3.5 inch SAS and SATA drives
  • Each bay supports up to 24 TB for 48 TB total capacity
  • Offline cloning between SAS and SATA without a computer
  • USB 3.0 Type-C delivers up to 5 Gbps transfer speed
  • Vertical layout with 12 V 4 A power adapter aids heat dissipation

Dual-bay SAS/SATA cloner

The MAIWO K3082ASAS is a dual-bay enclosure that accepts both 2.5 and 3.5 inch SAS and SATA hard drives or SSDs. It is aimed at system administrators and data-recovery specialists who need to duplicate or access server-grade disks without installing them inside a chassis. Each bay supports drives up to 24TB for a combined 48TB capacity.

Tool-free vertical dock with USB-C

Drives slide into the vertical plastic bays without screws or trays, and the included 12V 4A power adapter feeds both slots independently. A USB 3.0 Type-C port on the rear delivers up to 5Gbps host connectivity, while the supplied 10Gbps USB-C to USB-C/A cable ensures compatibility with laptops, desktops, MacBooks and other USB hosts. LED indicators show power and access status for each bay at a glance.

Passive cooling and offline clone modes

The upright layout promotes natural airflow around both drives since no fan is fitted, keeping operating temperatures low during extended read or write sessions. Offline cloning works at the push of a button in SAS-to-SATA, SAS-to-SAS or SATA-to-SATA directions without a computer attached. Power draw is limited to the external 12V 4A supply, so no additional host power is required.

Highlights

  • Dual-bay design accepts 2.5 and 3.5 inch SAS and SATA drives
  • Each bay supports up to 24 TB for 48 TB total capacity
  • Offline cloning between SAS and SATA without a computer
  • USB 3.0 Type-C delivers up to 5 Gbps transfer speed
  • Vertical layout with 12 V 4 A power adapter aids heat dissipation

Specifications

BrandMAIWO
SeriesSAS Docking Station
ModelK3082ASAS
ColorBlack
Size2.5" & 3.5"
AC AdapterYes
MaterialClassic Plastic
Internal InterfaceSAS / SATA
External InterfaceUSB C
FanNo
Dimensions15.32*111.2*66mm

Questions about this item

Does the USB 3.0 Type-C port really sustain 5 Gbps when two drives are active?

The USB 3.0 Type-C interface is rated at 5 Gbps and both bays can read or write simultaneously at that speed.

What physical drive sizes fit the two bays?

Each bay accepts 2.5 inch and 3.5 inch SAS or SATA drives with a maximum of 24 TB per bay.

How do I start an offline clone without a PC?

Insert the source and target drives, power on the unit, then press the clone button once to begin the one-key duplication.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.