We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Mean Well

Mean Well SE-600-48 48V 12.5A 600W power supply

SKU CH-8F2X-CRCG2

Delivers 48 V at 12.5 A with an adjustable 43 to 56 V output and 90 to 264 V AC input for up to 600 W

  • TypeProprietary Power Supply
  • Adjustable 43-56 V DC output suits varied loads
  • Switchable 90-264 V AC input works worldwide
  • 600 W capacity powers demanding amplifiers
  • 5 A at 48 V delivers strong current
  • UL recognised design meets safety standards

48 V regulated power supply

This Mean Well SE-600-48 delivers 48 V DC at 12.5 A for a total of 600 W of regulated output. The unit accepts a switchable AC input range of 90 to 264 V and provides an adjustable DC output from 43 to 56 V. It carries UL recognition and is manufactured in the United States. The proprietary design targets equipment requiring a stable high-current 48 V rail.

Replaces lower-capacity 48 V units

Install this supply when existing 48 V sources cannot meet the 600 W demand or when the output voltage must be trimmed between 43 and 56 V. The wide 90 to 264 V AC input allows direct replacement in regions with different mains standards without external tap changes. The jump is worth it when the load consistently exceeds the rating of the previous supply or when voltage adjustment is required for system calibration.

Suits amplifiers and industrial 48 V loads

This supply fits amplifiers and other gear specified for 48 V DC at up to 12.5 A continuous draw. Builders needing a different output voltage, a standard ATX form factor, or integrated DC-DC conversion for lower-voltage rails should look at other products. The proprietary mechanical design also means it does not drop into standard PC cases or rack shelves.

Highlights

  • Adjustable 43-56 V DC output suits varied loads
  • Switchable 90-264 V AC input works worldwide
  • 600 W capacity powers demanding amplifiers
  • 5 A at 48 V delivers strong current
  • UL recognised design meets safety standards

Specifications

TypeProprietary Power Supply

Questions about this item

What mounting holes or brackets does the 600 W unit use?

The enclosure uses the standard Mean Well screw pattern for chassis mounting; four corner holes accept M3 or #4 hardware.

Which step is most often missed when wiring the AC input?

The slide switch must be set to match the local mains — 90 to 264 V AC — before the supply is powered on.

When should the internal fan be cleaned or replaced?

Inspect the fan every 12 months; replace it if airflow drops or bearing noise appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.