We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular E3.S enterprise SSD with gold edge connector and silver label

Micron

Micron 9550 PRO 7.50 TB enterprise SSD E3.S NVMe 5.0 MTFDLBQ7T6THA-1BK1DABYYR

SKU CH-CTYH-XQYR3 MPN MTFDLBQ7T6THA-1BK1DABYYR

E3.S enterprise SSD with 7.50 TB capacity and PCIe 5.0 NVMe interface delivering 14 GB/s reads and 10 GB/s writes

  • 50 TB capacity supports dense data-centre deployments
  • Sequential read up to 14 GB/s accelerates AI workloads
  • Sequential write up to 10 GB/s sustains high-throughput logging
  • PCIe 5.0 NVMe interface delivers Gen5 bandwidth
  • E3.S form factor fits OCP 2.0 and 2.5 platforms

Micron 9550 PRO 7.50 TB E3.S SSD

The Micron 9550 PRO is a 7.50 TB enterprise solid-state drive built for internal data-centre deployment. It uses the E3.S form factor and connects through a PCI Express NVMe 5.0 interface. Sequential reads reach 14 GB/s and sequential writes reach 10 GB/s. The drive is designed for workloads such as AI, high-performance databases, caching, OLTP and high-frequency trading.

Suited for PCIe 5.0 data-centre servers

This SSD fits servers that accept E3.S drives and run PCIe 5.0 for maximum throughput. It also supports Open Compute Project 2.0 and 2.5 for advanced telemetry and health monitoring. Buyers whose platforms only support PCIe 4.0 or earlier, or that require a different physical form factor, should look at other options. The drive targets high-density configurations scaling toward 30.72 TB per unit.

PCI Express NVMe 5.0 interface

The single specification that decides compatibility is the PCI Express NVMe 5.0 interface combined with the E3.S form factor. The host system must provide an E3.S slot wired for PCIe 5.0 to realise the stated 14 GB/s read and 10 GB/s write performance. Without that slot the drive will not operate at its rated speed or may not fit at all.

Highlights

  • 50 TB capacity supports dense data-centre deployments
  • Sequential read up to 14 GB/s accelerates AI workloads
  • Sequential write up to 10 GB/s sustains high-throughput logging
  • PCIe 5.0 NVMe interface delivers Gen5 bandwidth
  • E3.S form factor fits OCP 2.0 and 2.5 platforms

Specifications

No published specifications for this item yet.

Questions about this item

How much power does the 9550 PRO 7.50 TB E3.S drive draw when running sustained AI workloads all day?

The Micron 9550 PRO is engineered for power efficiency in data-centre environments, delivering up to 14 GB/s sequential reads and 10 GB/s writes over PCIe 5.0 while maintaining thermal stability under continuous heavy load.

What server infrastructure must I already have to install this E3.S NVMe 5.0 SSD?

You need a server or storage platform with an E3.S drive bay and a PCIe 5.0 backplane or riser that can supply the required lanes and power for NVMe 5.0 operation.

Will this 9550 PRO work in my existing OCP 2.0 sleds alongside older NVMe drives?

Yes, the drive supports OCP 2.0 and 2.5 specifications, so it fits standard OCP sleds and can coexist with earlier NVMe generations on the same backplane.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.