We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pink aluminium switch-mode power supply, rectangular box form factor

myVolts

myVolts S-180-12 12V 15A 180W pink power supply

SKU CH-MW4H-PSCFS

A 12 V 15 A switch-mode supply delivering 180 W with short-circuit, overload and over-voltage protection for industrial automation, LED displays, CCTV and 3D printers

  • TypeAT
  • High efficiency and low DC ripple for stable output
  • Operates from 0 to 40 °C for long service life
  • High insulation strength for safe operation
  • 100 % full-load burn-in test ensures reliability
  • circuit, overload and overvoltage protection included

Power supply for industrial and 3D printer use

The myVolts S-180-12 delivers a regulated DC 12V output rated at 15A for a total of 180W. It accepts a wide AC input range of 110V or 220V with a ±15% tolerance. The unit is built for industrial automation, LED displays, CCTV systems, radio equipment and 3D printers. Its aluminium alloy housing aids heat dissipation without a fan.

Verify voltage, current

Confirm that your equipment requires exactly 12V DC and draws no more than 15A continuously. The supply operates from 0°C to 40°C ambient with humidity up to 95% non-condensing. Input terminals are labelled L and N for AC mains, while output terminals use GND for negative and V for positive. An ADJ trimmer allows a small output voltage adjustment if needed.

Steady output under continuous load

The supply has passed a 100% full-load burn-in test and maintains low DC ripple during sustained operation. Overload, overvoltage and short-circuit protections shut the unit down safely if limits are exceeded. High insulation strength and CCC, FCC and CE compliance support reliable long-term use in fixed installations. Natural convection cooling keeps noise to zero.

Highlights

  • High efficiency and low DC ripple for stable output
  • Operates from 0 to 40 °C for long service life
  • High insulation strength for safe operation
  • 100 % full-load burn-in test ensures reliability
  • circuit, overload and overvoltage protection included

Specifications

TypeAT

Questions about this item

What comes in the box with the myVolts S-180-12 power supply and what else is needed to install it?

The unit ships as a standalone open-frame supply with screw-terminal blocks for AC input (L, N) and DC output (GND, V, +V/ADJ). You must provide your own AC mains cord, mounting hardware and any wiring or connectors required for the load.

How do I decide between the S-36-12, S-50-12 and this S-180-12 model?

Choose by the continuous current your 12 V equipment draws: the S-36-12 delivers 3 A (36 W), the S-50-12 delivers 4.2 A (50 W) and this S-180-12 delivers 15 A (180 W). Match the model to the highest sustained load you expect.

What does the 180 W rating mean when the supply is running inside a 3D printer or LED display?

It means the unit can continuously provide 12 V at up to 15 A (180 W) with low DC ripple, built-in short-circuit, overload and over-voltage protection, and an operating temperature range of 0–40 °C, so it will sustain full load during long prints or display sessions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.