We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules without heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 1.1TB 12x96GB DDR5-6400 CL52 2Rx4 RDIMM ECC GIGABYTE MZ33-CP1 memory upgrade

SKU CH-VJ8C-2EK72

1.1 TB DDR5-6400 ECC RDIMM kit with twelve 96 GB modules, CL52 latency, 1.1 V operation and 2Rx4 registered design for the Gigabyte MZ33-CP1 motherboard

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Show 24 more configurations
  • 1TB capacity across 12 matched 96GB modules for maximum server density
  • DDR5-6400 PC5-51200 speed with CL52 latency runs at rated frequency on the MZ33-CP1
  • Registered ECC 2Rx4 architecture offloads the controller and corrects single-bit errors on the fly
  • 10V operation at 288-pin RDIMM form factor matches the board's exact electrical and mechanical spec
  • Lifetime replacement warranty with US-based technical support backs every module in the kit

Exact-match kit for GIGABYTE MZ33-CP1

This 1.1TB kit delivers twelve 96GB DDR5 RDIMM modules at 6400MHz with CL52 timing. It targets administrators who need the full 12-slot population on a MZ33-CP1 motherboard and require registered ECC memory for production workloads.

Registered ECC architecture for full-slot stability

The 2Rx4 registered design offloads the memory controller so every slot runs at rated capacity while ECC corrects single-bit errors on the fly. Modules operate at 1.10V and use the 288-pin DDR5 RDIMM form factor the board expects, freeing you from population-order guesswork when the manual is followed.

Replaces mixed-capacity or unbuffered configurations

Upgrading from partial kits or UDIMMs removes the risk of downclocked speeds and silent data corruption in multi-socket servers. The jump is worth it when your workload demands the full 1.1TB address space and the motherboard’s qualified vendor list calls for this exact rank, voltage and timing combination.

Highlights

  • 1TB capacity across 12 matched 96GB modules for maximum server density
  • DDR5-6400 PC5-51200 speed with CL52 latency runs at rated frequency on the MZ33-CP1
  • Registered ECC 2Rx4 architecture offloads the controller and corrects single-bit errors on the fly
  • 10V operation at 288-pin RDIMM form factor matches the board's exact electrical and mechanical spec
  • Lifetime replacement warranty with US-based technical support backs every module in the kit

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 1.1V DDR5 voltage limit power headroom when all 12 slots run continuously?

Each 96GB module operates at the standard DDR5 1.10V, so the memory subsystem draws its rated power with no extra voltage overhead even at full 1.1TB capacity.

Does the registered ECC design keep thermals and noise lower than unbuffered kits under 24/7 load?

The RDIMM architecture buffers address and command signals, reducing electrical load on the motherboard and helping the system maintain stable temperatures without additional cooling noise.

Must the GIGABYTE MZ33-CP1 already have 12 free 288-pin DDR5 RDIMM slots to install this kit?

Yes, the 12-module kit requires 12 available 288-pin RDIMM slots populated in the order specified by the MZ33-CP1 manual for full 1.1TB operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.