We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in a kit

NEMIX RAM

NEMIX RAM 1.5TB (12x128GB) DDR5 4800 CL40 ECC RDIMM THINKMATE GPU-Optimized Server

SKU CH-YW90-N7141

1.5 TB DDR5-4800 ECC registered server kit with twelve 128 GB modules for ThinkMate GPU-optimised systems

  • Capacity1.5TB (12 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 5TB capacity from twelve 128GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth
  • CL40 latency at 1.1V operating voltage
  • ECC registered RDIMM for error correction
  • 288-pin 4Rx4 design built for ThinkMate GPU server

1.5 TB DDR5 ECC RDIMM kit for ThinkMate GPU servers

This 1.5 TB memory kit contains twelve 128 GB DDR5 4800 registered DIMMs with ECC and a CAS latency of CL40. It is built for the ThinkMate GPX-XH8-22S4-8GPU GPU-optimised server and operates at 1.1 V. The modules use 4Rx4 organisation and 288-pin DDR5 form factor.

Upgrade from lower-capacity DDR5 RDIMMs

The jump is worth it when workloads such as large-model training, simulation or in-memory databases exceed the capacity of smaller kits. Adding the full 12-module set maximises the server’s memory bandwidth at DDR5 4800 speeds. Partial population is possible but leaves bandwidth and capacity unused.

Verify motherboard slot count

Confirm the ThinkMate server has twelve DDR5 RDIMM slots available and that the platform’s qualified-vendor list includes 4Rx4 128 GB modules at 4800 MT/s. Check that the BIOS version supports the full 1.5 TB configuration. Ensure the chassis airflow can accommodate twelve modules without additional cooling.

Highlights

  • 5TB capacity from twelve 128GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth
  • CL40 latency at 1.1V operating voltage
  • ECC registered RDIMM for error correction
  • 288-pin 4Rx4 design built for ThinkMate GPU server

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K12
Capacity1.5TB (12 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content1.5TB (12X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will the 12x128GB 288-pin DDR5 RDIMMs fit the THINKMATE GPX-XH8-22S4-8GPU server?

The kit is built for the THINKMATE GPX-XH8-22S4-8GPU GPU-optimized server and uses the standard 288-pin DDR5 RDIMM form factor required by that platform.

What is the correct sequence for populating the 12 slots with these 4Rx4 registered modules?

Follow the server manual's population order; install modules in the prescribed slots per channel so the memory controller initialises all 12 ranks at 4800 MT/s.

When should the 1.5TB ECC RDIMM kit be swapped out in a continuous server deployment?

Replace modules only if ECC correctable-error counts rise sharply or the system logs uncorrectable errors, indicating chip degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.