We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 1.5TB DDR5 6400 12x128GB CL52 1.1V ECC RDIMM memory upgrade for Supermicro H14DSG-OD

SKU CH-T8JP-S8RF5

1.5 TB DDR5-6400 ECC registered 12-module kit validated for Supermicro H14DSG-OD

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 5 TB capacity with twelve 128 GB modules
  • DDR5 6400 speed rated at PC5 51200
  • CL52 latency at 1.1 V operation
  • ECC registered RDIMM for error correction
  • 288 pin 2Rx4 layout matches Supermicro H14DSG-OD

NEMIX RAM 1.5TB DDR5-6400 ECC RDIMM Kit

This NEMIX RAM kit delivers 1.5TB of DDR5 memory across twelve 128GB Registered DIMMs. Each module runs at 6400 MT/s with CL52 latency at 1.1V and uses a 2Rx4 organisation. The 288-pin RDIMM form factor and ECC Registered design match the Supermicro H14DSG-OD motherboard requirements exactly.

For Supermicro H14DSG-OD Servers Needing Maximum

This kit suits administrators populating every slot on a Supermicro H14DSG-OD board to reach the platform's supported memory ceiling. It is not for systems that accept only unbuffered UDIMMs or SODIMMs, nor for builds that require a lower total capacity or a different pin count.

12 x 128GB 2Rx4 Registered ECC Configuration

The twelve-module 2Rx4 Registered ECC layout is the single specification that determines compatibility with the H14DSG-OD memory controller. The board's population rules expect this exact rank structure and voltage so the full 1.5TB is recognised at the rated 6400 MT/s speed.

Highlights

  • 5 TB capacity with twelve 128 GB modules
  • DDR5 6400 speed rated at PC5 51200
  • CL52 latency at 1.1 V operation
  • ECC registered RDIMM for error correction
  • 288 pin 2Rx4 layout matches Supermicro H14DSG-OD

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

What comes in the NEMIX RAM 1.5TB DDR5 6400 kit and do I need anything else to install it?

The kit includes twelve 128GB DDR5 6400 RDIMM modules for a total of 1.5TB. No additional parts are required; each module is a 288-pin registered DIMM that fits directly into the Supermicro H14DSG-OD memory slots.

Should I choose this 12x128GB CL52 kit or a different capacity for my Supermicro H14DSG-OD?

This 12x128GB kit delivers 1.5TB at DDR5 6400 with CL52 timing and 1.1V operation. Select it when your workload needs the maximum supported capacity across all twelve slots; choose a smaller kit only if your memory requirement is lower.

What does the DDR5 6400 CL52 rating mean once the modules are installed in the H14DSG-OD?

The memory will run at 6400 MT/s with a CAS latency of 52 cycles at 1.1V. The registered 2Rx4 organisation lets the memory controller drive all twelve slots at this rated speed while ECC corrects single-bit errors in real time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.