SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 128 GB DDR5 ECC registered kit with two 64 GB modules at 4800 MT/s and CL40 for Supermicro GPU SuperServer systems
This kit delivers 128 GB of DDR5 registered ECC memory in a matched pair of 64 GB modules. It is built for Supermicro GPU SuperServer systems including the SYS-821GE-TNHR, SYS-821GV-TNR and SYS-421GE-TNRT platforms. The modules operate at 4800 MT/s with a CAS latency of 40 and a low 1.1 V supply. IT professionals who need validated stability for mission-critical workloads will find this configuration suitable.
Registered buffering reduces electrical load on the server memory controller, allowing higher capacities per channel. On-die ECC corrects single-bit errors to protect data integrity during sustained compute tasks. The 2Rx4 organisation provides dense 64 GB per module without requiring additional DIMM slots. Samsung, Micron or Hynix major-OEM chips are used, and every kit is stress-tested under load before shipping.
This memory fits the three listed Supermicro models and other boards that accept DDR5 4800 RDIMM modules with matching rank and voltage. Builders who need unbuffered UDIMM memory, non-ECC modules or speeds above 4800 MT/s should look elsewhere. Systems requiring a different pin count, lower capacity per DIMM or a heat spreader will not be compatible with this kit.
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
The kit uses 2Rx4 registered ECC DDR5 at 4800 MT/s; it will remain compatible with any future CPU that supports the same DDR5 RDIMM specification.
The registered ECC design and 1.1 V operation keep thermal and signal integrity within spec, so the platform memory controller or workload bandwidth typically saturates before the modules themselves.
Each module runs at 1.1 V with no heat spreader, so power draw stays low and heat output is minimal for a 128 GB DDR5 registered kit.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?