We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR4 RDIMM modules, no heat spreader

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR4 2933MHz CL21 ECC RDIMM memory upgrade for Dell Precision 7820 Tower

SKU CH-E6H9-BPCZ2

A 128 GB DDR4 ECC registered kit with two 64 GB modules running at 2933 MHz CL21 for Dell Precision 7820 Tower

  • Capacity128GB (2 x 64GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128 GB capacity with two 64 GB modules for heavy workloads
  • DDR4 2933 MHz speed rated at PC4-23400 for fast data transfer
  • ECC registered RDIMM design detects and corrects memory errors
  • CL21 CAS latency at 1.20 V for efficient operation
  • Validated for Dell Precision 7820 Tower workstation compatibility

Dell Precision 7820 ECC RDIMM kit

This 128GB kit provides two 64GB DDR4 2933MHz registered DIMMs built for the Dell Precision 7820 Tower workstation. ECC and registered operation protect data integrity in professional workloads. The modules run at 1.20V with CL21 latency. They are validated for compatibility with the specified Dell platform.

Capacity and headroom for server tasks

Two 64GB modules deliver 128GB total capacity for large datasets, virtualization and multi-application workflows. Four-rank 4Rx4 organisation increases density per channel. Registered buffering reduces electrical load on the memory controller. The kit suits workloads that need maximum supported memory per slot.

DDR4 2933 registered interface limits

DDR4 2933 (PC4-23400) sets the peak transfer rate for this registered ECC design. Registered signalling adds one clock cycle of latency versus unbuffered modules. 288-pin RDIMM form factor fits only DDR4 RDIMM slots. Systems requiring unbuffered or non-ECC memory cannot use this kit.

Highlights

  • 128 GB capacity with two 64 GB modules for heavy workloads
  • DDR4 2933 MHz speed rated at PC4-23400 for fast data transfer
  • ECC registered RDIMM design detects and corrects memory errors
  • CL21 CAS latency at 1.20 V for efficient operation
  • Validated for Dell Precision 7820 Tower workstation compatibility

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-944K2
Capacity128GB (2 x 64GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank4Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (2X64GB) DDR4 2933MHZ PC4-23400 4Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will the 2933MHz DDR4 ECC RDIMM modules run at full speed alongside slower DDR4 DIMMs I already have in the Precision 7820?

The system will clock all installed memory down to the speed of the slowest module present, so existing slower DDR4 DIMMs will limit these 2933MHz kits to that lower frequency.

How can I confirm the 128GB kit is operating as registered ECC memory after installation?

Enter the system BIOS or UEFI on boot and verify the total capacity shows 128GB, the speed reads 2933MHz, and the memory mode reports ECC Registered active.

Does the 2x64GB package include a heat spreader or any installation tools I need to buy separately?

The modules ship without a heat spreader and no tools are included; only the two 288-pin RDIMM sticks are in the box.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.