SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
128GB DDR4 3200 ECC registered server kit with two 64GB modules at CL22 and 1.2V
This 128GB kit contains two 64GB DDR4 3200 registered DIMMs with ECC and a CAS latency of CL22. It is built for ThinkMate TWX-QS8-14E3 and TWX-QS8-24E3 tower servers that require registered memory. The modules operate at 1.2V and use a 4Rx4 organisation.
Running at 1.20V keeps power draw low for dense server configurations. The modules have no heat spreader, so airflow across the DIMM slots handles cooling. Registered buffering adds minimal latency while maintaining signal integrity under sustained load.
This kit replaces lower-capacity DDR4 RDIMMs in the listed ThinkMate models when 128GB is needed for virtualisation or large datasets. The jump is worth it when the workload exceeds the current memory ceiling and the platform supports 4Rx4 registered modules.
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-944K2 |
| Capacity | 128GB (2 x 64GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 4Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (2X64GB) DDR4 3200MHZ PC4-25600 4Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
Power off the server, open the chassis, locate the DDR4 DIMM slots, align each module notch with the slot key, press firmly until the retention clips click, then close the case and power on.
No firmware updates or batteries are needed; the modules operate passively at 1.2 V and rely on the server memory controller for error correction throughout their lifespan.
The 4Rx4 organisation and 1.2 V operation mean sustained full-load bandwidth is constrained by the registered buffer and rank density before any thermal throttle activates.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?