We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 4800 CL40 ECC RDIMM ThinkMate memory upgrade

SKU CH-GDWZ-VQEBS

128 GB DDR5 ECC registered server memory kit with two 64 GB modules at 4800 MT/s and CL40 latency for ThinkMate rackmount systems

  • Capacity128GB (2 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB capacity with two 64 GB modules
  • DDR5 4800 speed rated at PC5-38400
  • ECC registered design for data integrity
  • CL40 latency at 1.1 V operation
  • Validated for ThinkMate RAX-XS4-21S4 server

128 GB DDR5 ECC RDIMM kit

This 128 GB kit contains two 64 GB DDR5 4800 registered DIMMs with ECC and a CL40 latency. It is built for ThinkMate RAX-XS4-21S4 rackmount servers that require registered memory with error correction.

Installation notes

The modules use the standard 288-pin DDR5 RDIMM form factor and operate at 1.1 V, so they seat in the server’s memory slots without adapters. The main risk is mixing registered DIMMs with unbuffered memory or populating slots in an order the system board does not support, which will prevent the server from posting.

DDR5 4800 registered limits

The DDR5 4800 interface caps the data rate at 4800 MT/s and the registered design adds one clock cycle of command buffering, which slightly increases latency compared with unbuffered modules. The CL40 timing and 1.1 V voltage are fixed by the JEDEC standard for this speed grade, so the kit cannot run at higher frequencies or lower latencies without leaving specification.

Highlights

  • 128 GB capacity with two 64 GB modules
  • DDR5 4800 speed rated at PC5-38400
  • ECC registered design for data integrity
  • CL40 latency at 1.1 V operation
  • Validated for ThinkMate RAX-XS4-21S4 server

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K2
Capacity128GB (2 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How do I verify the 128GB DDR5 4800 kit is running at CL40 after installation?

Enter the server BIOS or UEFI and confirm the memory frequency shows 4800 MT/s with CAS latency 40; the ECC status should also report as active for each 64GB module.

What comes in the box and do I need extra parts for the ThinkMate RAX-XS4-21S4?

The kit includes two 64GB 288-pin DDR5 RDIMMs; no additional memory components are required for the listed ThinkMate rackmount server.

Which capacity version should I choose for a dual-channel ThinkMate server needing 128GB total?

Select the 2 x 64GB kit (part MR38400-924K2) to populate two channels with 128GB of registered ECC DDR5 at 1.1V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.