We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, bare chips, 288 pins each

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 4800 ECC RDIMM CL40 1.1V 2Rx4 SuperMicro Server Memory Upgrade

SKU CH-N0VW-1X3B2

A 128 GB DDR5 ECC registered server memory kit with two 64 GB modules running at 4800 MT/s and CL40 latency

  • Capacity128GB (2 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB total capacity in a 2 x 64 GB kit
  • DDR5 4800 speed rated at PC5 38400 bandwidth
  • ECC registered RDIMM for data integrity in servers
  • CL40 CAS latency at 1.10 V operating voltage
  • 288 pin 2Rx4 modules validated for SuperMicro CloudDC SuperServer platforms

Server Memory Kit

This NEMIX RAM kit provides 128GB of DDR5 4800 ECC registered memory in a dual 64GB module configuration. It operates at 1.1V with CL40 latency and uses a 2Rx4 rank structure on 288-pin RDIMMs. The modules are validated for specific SuperMicro CloudDC SuperServer platforms.

Suited For

This memory suits administrators upgrading SuperMicro SYS-621C-TN12R, SYS-611C-TN4R or SYS-121C-TN2R servers where registered ECC DDR5 is required. It is not for desktop PCs, workstations needing unbuffered DIMMs or systems that cannot accept registered modules or the DDR5 4800 standard.

Capacity & Headroom

The 128GB total capacity handles large virtualisation workloads, in-memory databases and multi-tenant container clusters. Headroom remains for adding further kits if the motherboard provides additional slots. Workloads exceeding 128GB or requiring speeds above DDR5 4800 will need a different configuration.

Highlights

  • 128 GB total capacity in a 2 x 64 GB kit
  • DDR5 4800 speed rated at PC5 38400 bandwidth
  • ECC registered RDIMM for data integrity in servers
  • CL40 CAS latency at 1.10 V operating voltage
  • 288 pin 2Rx4 modules validated for SuperMicro CloudDC SuperServer platforms

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K2
Capacity128GB (2 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does this 128GB DDR5 4800 kit require a SuperMicro motherboard with 288-pin DDR5 RDIMM slots?

Yes, the 2x64GB modules are 288-pin DDR5 RDIMMs built for SuperMicro CloudDC SuperServer platforms such as SYS-621C-TN12R, SYS-611C-TN4R and SYS-121C-TN2R.

Can I mix these CL40 1.1V ECC RDIMMs with slower DDR5 memory already installed in the server?

The motherboard will run all populated slots at the lowest common speed and latency, so older DDR5 modules will force this kit down to their slower timing.

How do I confirm the 128GB kit is running at 4800 MT/s with ECC active after installation?

Check the BIOS memory information screen or run a tool such as dmidecode to verify 4800 MT/s, CL40, 1.1V and ECC registered status for each 64GB module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.