SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
128 GB DDR5 ECC registered server memory kit in a 2×64 GB 2Rx4 configuration for SuperMicro X13SET-G and X13SET-GC motherboards
This 128 GB kit contains two 64 GB DDR5 4800 registered DIMMs built for Supermicro X13SET-G and X13SET-GC motherboards. It targets administrators who need error-correcting memory in dual-processor or single-processor server workloads. The modules operate at 1.1 V with a CAS latency of CL40. Buyers needing non-ECC consumer memory or higher-speed bins should look elsewhere.
Each module uses a 2Rx4 organisation with Samsung, Micron or Hynix chips, delivering the registered signal buffering required by the qualified platforms. The 1.1 V operating voltage matches the DDR5 baseline for these boards, so no manual voltage adjustment is necessary. Systems that cannot accept registered DIMMs or that require unbuffered memory will not post with this kit.
The 288-pin DDR5 form factor fits the standard server DIMM slots on the listed Supermicro boards; align the key notch and press until the ejectors click. Common issues include mixing this kit with existing modules of different rank or speed, which forces the platform to down-clock or halt at POST. Always populate slots per the motherboard manual for the correct channel layout.
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
DDR5 ECC RDIMM modules have no firmware to update and no scheduled replacement interval; ECC corrects single-bit errors on the fly while the registered buffer reduces electrical load on the memory controller.
The 4800 MT/s data rate sets the peak bandwidth ceiling; CL40 latency affects access delay but does not cap sustained throughput once the pipeline is full.
Each 64 GB module operates at 1.10 V with no heat spreader, so power draw stays low and airflow from standard server fans keeps temperatures within normal DDR5 operating limits.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?