We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules side by side, bare circuit boards with gold edge connectors and black memory chips

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 5600 CL46 1.1V ECC RDIMM Supermicro X14SDI-36C-SP3F memory upgrade

SKU CH-Y4ET-J70J4

A 128 GB DDR5 5600 CL46 1.1 V ECC registered RDIMM kit built for the Supermicro X14SDI-36C-SP3F motherboard

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

  • Full 128 GB capacity with two 64 GB modules
  • DDR5 5600 speed runs at rated frequency
  • Registered ECC corrects single-bit errors automatically
  • 10 V operation matches server memory controller specs
  • Verified fit for Supermicro X14SDI-36C-SP3F motherboard

Exact-match server upgrade

This 128 GB kit provides two 64 GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.1 V operation. It is built specifically for the Supermicro X14SDI-36C-SP3F motherboard and uses registered ECC modules with a 2Rx4 organisation.

Installation notes

The 288-pin RDIMM form factor matches the board's DIMM slots exactly, so no adapter or converter is needed. Because the kit is rank- and voltage-matched to the platform, the memory controller recognises the full capacity at rated speed without manual tuning. The only common issue is ignoring the motherboard's required population order; always follow the manual's slot sequence when filling all channels.

DDR5 RDIMM limits

Registered DDR5 modules offload electrical load from the memory controller, allowing every slot to run fully populated at the rated data rate. ECC corrects single-bit errors on the fly, preventing silent data corruption in production workloads. The practical ceiling is the maximum capacity and population rules defined by the specific motherboard, which vary by model and BIOS revision.

Highlights

  • Full 128 GB capacity with two 64 GB modules
  • DDR5 5600 speed runs at rated frequency
  • Registered ECC corrects single-bit errors automatically
  • 10 V operation matches server memory controller specs
  • Verified fit for Supermicro X14SDI-36C-SP3F motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I confirm the 128GB kit runs at DDR5 5600 CL46 after installation?

Enter the BIOS or UEFI on the Supermicro X14SDI-36C-SP3F and verify the memory frequency shows 5600 MT/s with timings at CL46 and voltage at 1.1V.

What does the package contain and is anything else required?

The box includes two 64GB 288-pin DDR5 RDIMM modules for a total of 128GB; no extra components are needed for installation.

Which capacity should I choose for this motherboard?

This 128GB 2Rx4 kit matches the Supermicro X14SDI-36C-SP3F specifications; consult your manual for approved population order and maximum supported capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.