We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, bare circuit boards, no heat spreaders

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 5600 ECC RDIMM memory upgrade for SuperMicro B13SEG

SKU CH-1R0W-8ZERK

A 128 GB dual-module DDR5 5600 ECC registered kit built for SuperMicro B13SEG servers

  • Capacity128GB (2 x 64GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB kit expands server capacity for heavy workloads
  • DDR5 5600 MT/s transfers data at PC5-44800 bandwidth
  • ECC registered design corrects errors to protect data integrity
  • 2Rx4 organisation with CL46 latency optimises throughput
  • 1 V operation reduces power draw in dense configurations

System-specific DDR5 kit

This 128GB kit contains two 64GB DDR5 ECC RDIMM modules built for the SuperMicro B13SEG motherboard. It targets server and workstation administrators who need registered memory with error correction for mission-critical workloads. The modules run at 5600 MT/s with a CL46 latency and 1.10V operation.

Installation notes

The 288-pin RDIMM form factor fits standard DDR5 server slots and the kit is validated for the named platform. Registered DIMMs must be populated according to the board’s memory population rules; mixing registered and unbuffered modules will prevent boot. Always follow the motherboard manual for correct slot order and maximum capacity per channel.

Deciding specification

The registered ECC RDIMM design with 2Rx4 organisation is the single factor that determines compatibility. Systems that require unbuffered non-ECC UDIMMs or a different rank structure cannot use this kit. Verify that your platform explicitly supports DDR5 registered ECC memory before purchase.

Highlights

  • 128 GB kit expands server capacity for heavy workloads
  • DDR5 5600 MT/s transfers data at PC5-44800 bandwidth
  • ECC registered design corrects errors to protect data integrity
  • 2Rx4 organisation with CL46 latency optimises throughput
  • 1 V operation reduces power draw in dense configurations

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (2X64GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How can I confirm the kit is running at 5600 MT/s with CL46 latency after installation?

Enter the system BIOS or use a tool such as CPU-Z to verify the memory frequency shows 5600 MT/s and the CAS latency reads CL46.

What does the kit contain and is any extra hardware required?

The box includes two 64 GB DDR5 5600 ECC registered DIMMs for a total of 128 GB; no additional components are needed for installation.

Which capacity and speed version should I choose for a SuperMicro B13SEG motherboard?

This 128 GB (2 × 64 GB) DDR5 5600 ECC RDIMM kit matches the motherboard's supported specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.