We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 128GB kit

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 5600MHz PC5-44800 CL46 2Rx4 1.1V ECC Registered RDIMM 288-Pin memory upgrade

SKU CH-H3HH-T63AA

128 GB registered ECC DDR5 kit in two 64 GB modules running at 5600 MHz CL46 for the Gigabyte MA34-CP0 motherboard

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Show 24 more configurations
  • 128 GB capacity in a matched 2 x 64 GB kit
  • DDR5-5600 speed rated at PC5-44800 bandwidth
  • Registered ECC design corrects single-bit errors on the fly
  • CL46 latency at 1.1 V for stable server operation
  • 288-pin RDIMM form factor built for GIGABYTE MA34-CP0

Exact-Match DDR5 Server Kit

This 128GB kit contains two 64GB DDR5 5600MHz Registered ECC RDIMMs built to the precise rank, voltage and timing the GIGABYTE MA34-CP0 motherboard expects. The modules install as a matched pair so the system recognises the full capacity at its rated speed.

Sustained Load Stability

Registered buffering offloads the memory controller, allowing every populated slot to run continuously at full capacity without signal degradation. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during prolonged workloads.

DDR5 Interface Limits

The DDR5 5600 standard delivers a peak transfer rate of 44800 MT/s at 1.1V, but actual throughput depends on the motherboard's memory population rules and the processor's integrated controller. Maximum supported capacity per slot and total system capacity are defined by the platform, not by these modules alone.

Highlights

  • 128 GB capacity in a matched 2 x 64 GB kit
  • DDR5-5600 speed rated at PC5-44800 bandwidth
  • Registered ECC design corrects single-bit errors on the fly
  • CL46 latency at 1.1 V for stable server operation
  • 288-pin RDIMM form factor built for GIGABYTE MA34-CP0

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 1.1V DDR5 5600 kit run cooler than higher-voltage server memory?

Operating at 1.1V, these DDR5 5600 RDIMMs draw less power per module than higher-voltage alternatives, reducing heat output during continuous server workloads.

Must the GIGABYTE MA34-CP0 motherboard support registered ECC RDIMMs for this kit to function?

Yes, the board must accept 288-pin DDR5 registered ECC RDIMMs; the kit is validated for the MA34-CP0 which requires that exact DIMM type.

Can I mix these 2Rx4 CL46 modules with older single-rank DDR5 RDIMMs in the same server?

Mixing 2Rx4 registered ECC modules with different ranks or timings is not recommended; the memory controller expects uniform rank structure and CAS latency across all populated slots.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.