We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM sticks without heat spreaders in a kit

NEMIX RAM

NEMIX RAM 128GB (4×32GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM memory upgrade for SuperMicro C9Z890-MW

SKU CH-Y6PC-PH743

A 128GB kit of four 32GB DDR5 5600 CL46 1.1V unbuffered UDIMM modules validated for the SuperMicro C9Z890-MW motherboard

  • Capacity128GB (4 x 32GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB total capacity with four 32 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • Low 1.1 V operating voltage for efficient power use
  • CL46 CAS latency tuned for responsive data access
  • 288-pin UDIMM form factor built for SuperMicro C9Z890-MW

NEMIX RAM 128GB DDR5 5600 kit for SuperMicro

This NEMIX RAM kit provides 128GB of DDR5 memory across four 32GB UDIMM modules. It runs at 5600MT/s with a CAS latency of CL46 and operates at 1.1V. The modules are unbuffered, non-ECC, and built with 2Rx8 organisation using major OEM DRAM chips. They are validated for the SuperMicro C9Z890-MW motherboard.

Who this suits and who should look elsewhere

This kit suits administrators upgrading a SuperMicro C9Z890-MW workstation or server that accepts unbuffered non-ECC DDR5 UDIMMs. It is not for systems that require registered or ECC modules, nor for boards limited to lower speeds or different pin counts. Buyers needing error correction or registered signalling must choose a different specification.

The specification that decides fit

The decisive specification is the DDR5 5600 unbuffered non-ECC UDIMM form factor with 2Rx8 organisation at 1.1V. Only motherboards that explicitly support this exact combination will accept the kit without compatibility issues. The SuperMicro C9Z890-MW is the validated platform for this part number.

Highlights

  • 128 GB total capacity with four 32 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • Low 1.1 V operating voltage for efficient power use
  • CL46 CAS latency tuned for responsive data access
  • 288-pin UDIMM form factor built for SuperMicro C9Z890-MW

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 5600MHZ Non-ECC Unbuffered RAM
Part NumberMD44800-328K4
Capacity128GB (4 x 32GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB (4X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

Will my SuperMicro C9Z890-MW motherboard run this 128 GB DDR5 kit at the rated 5600 MT/s without manual tuning?

The kit is validated for the C9Z890-MW and ships at 5600 MT/s CL46 1.10 V; enable XMP or the equivalent DDR5 profile in BIOS to reach the rated speed.

Can I keep my existing 32 GB DDR5 modules and add this 4×32 GB kit for a mixed-capacity setup?

Mixing different capacities or ranks on the C9Z890-MW can prevent the board from training at 5600 MT/s; for best stability populate all four slots with this matched 2Rx8 kit.

After installation how do I confirm the system is using all 128 GB at 5600 MT/s CL46?

Open Task Manager → Performance → Memory or run CPU-Z; you should see 128 GB total, 5600 MT/s data rate and CL46 timings at 1.10 V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.