We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 UDIMM modules, bare chips, 288 pins

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR4 3200 CL22 ECC UDIMM for THINKMATE XF4-14E3

SKU CH-TFYD-KJTED

128GB DDR4 3200 ECC UDIMM kit with four 32GB modules at CL22 for Thinkmate XF4-14E3 workstations

  • Capacity128GB (4 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128GB total capacity across four 32GB modules
  • DDR4 3200 speed with PC4-25600 bandwidth rating
  • ECC unbuffered design detects and corrects data errors
  • CL22 CAS latency at 1.20V operating voltage
  • 288-pin UDIMM form factor validated for ThinkMate XF4-14E3

128GB ECC UDIMM Kit for Thinkmate XF4-14E3

This 128GB kit contains four 32GB DDR4 3200 modules built for the Thinkmate XF4-14E3 workstation. It delivers ECC error correction on an unbuffered 288-pin UDIMM form factor. The kit suits IT professionals and workstation users who need maximum registered capacity for data-integrity workloads.

Tool-free DIMM installation with ECC verification

Installation follows standard UDIMM procedure: power down, open the chassis, seat each 288-pin module until the retention clips engage, then power on. The motherboard must enable ECC in BIOS for error correction to function; otherwise the system will treat the memory as non-ECC. Mixing these 2Rx8 modules with existing sticks of different rank or speed can prevent the system from posting.

Verify motherboard slot count and ECC support

Confirm the Thinkmate XF4-14E3 has four available DDR4 UDIMM slots before ordering. The platform must support unbuffered ECC DDR4 at 1.2V and 3200 MT/s to run this kit at its rated CL22 timing. If the board limits memory speed or requires registered DIMMs, the modules will not operate correctly.

Highlights

  • 128GB total capacity across four 32GB modules
  • DDR4 3200 speed with PC4-25600 bandwidth rating
  • ECC unbuffered design detects and corrects data errors
  • CL22 CAS latency at 1.20V operating voltage
  • 288-pin UDIMM form factor validated for ThinkMate XF4-14E3

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-328K4
Capacity128GB (4 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB (4X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

How can I confirm the 128GB kit is running at DDR4 3200 CL22 after installation?

Enter the BIOS or use a tool such as CPU-Z to verify the memory reports 3200 MT/s, CL22 timings, 1.20 V and 128 GB total across all four slots.

What does the package contain and is anything else required?

The box includes the 4×32 GB DDR4 3200 ECC UDIMM kit (part ME25600-328K4); no extra cables, brackets or software are needed for installation.

Which capacity or version should I choose for the THINKMATE XF4-14E3?

This 128 GB (4×32 GB) DDR4 3200 CL22 ECC UDIMM kit is the exact configuration validated for the XF4-14E3 workstation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.