We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 UDIMM modules, no heat spreaders, 288-pin, 128GB kit

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR4 3200 ECC Unbuffered UDIMM memory upgrade

SKU CH-6MPE-F44NE

128GB DDR4 ECC unbuffered UDIMM kit with four 32GB modules running at 3200MHz for Thinkmate servers

  • Capacity128GB (4 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128 GB total capacity across four 32 GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC unbuffered design detects and corrects data errors
  • 20 V operation keeps power draw low
  • 288-pin UDIMM form factor fits compatible Thinkmate servers

ThinkMate Rackmount Compatibility

This NEMIX RAM kit delivers 128GB across four 32GB DDR4 3200 unbuffered ECC UDIMMs built for ThinkMate RAX-XS4-11E3 rackmount servers. Each module runs at 1.20V with CL22 timing and a 2Rx8 organisation using major OEM chips. The 288-pin DDR4 form factor fits the qualified platform without adaptation.

Administrators Adding ECC Capacity

IT teams expanding memory in validated ThinkMate servers will find the kit matches the qualified specification and includes lifetime replacement coverage. Builders needing registered DIMMs, lower latency bins, heat spreaders or non-ECC modules should look elsewhere because this product is unbuffered ECC only.

Sustained Load Behaviour

Modules are stress tested under load before shipping to verify stability during extended server workloads. The 1.20V operating voltage and unbuffered topology keep power draw consistent while ECC corrects single-bit errors throughout continuous operation.

Highlights

  • 128 GB total capacity across four 32 GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC unbuffered design detects and corrects data errors
  • 20 V operation keeps power draw low
  • 288-pin UDIMM form factor fits compatible Thinkmate servers

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-328K4
Capacity128GB (4 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB (4X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

Do I need a ThinkMate RAX-XS4-11E3 rackmount server for this 128GB DDR4 3200 ECC UDIMM kit to work?

This kit is validated for the ThinkMate RAX-XS4-11E3. It requires a system that accepts 288-pin DDR4 3200 ECC unbuffered UDIMMs at 1.2V with CL22 timing and 2Rx8 organisation.

Will the CL22 latency of these 32GB 2Rx8 modules slow down my existing DDR4 3200 ECC UDIMMs that run at a lower CAS latency?

All installed DDR4 3200 ECC UDIMMs will operate at the slowest common CAS latency. If your current modules run tighter than CL22, the memory controller will drop them to CL22 across every slot.

How can I confirm the 128GB kit is running at DDR4 3200 with ECC active after installation?

Enter the server BIOS or UEFI and verify the memory speed shows 3200 MT/s, voltage reads 1.2V, and ECC status reports enabled. OS tools such as dmidecode or CPU-Z will also report 2Rx8 organisation and ECC capability.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.