We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in a clear tray

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 4800 CL40 2Rx8 ECC RDIMM Dell PowerEdge XE9640 memory upgrade

SKU CH-69DP-PEMGP

A 128GB kit of four 32GB DDR5 4800 ECC registered DIMMs with CL40 latency for Dell PowerEdge XE9640 servers

  • Capacity128GB (4 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB capacity across four 32 GB modules expands server memory headroom
  • DDR5 4800 speed delivers high bandwidth for demanding workloads
  • ECC registered design detects and corrects errors to protect data integrity
  • 2Rx8 organisation with 1.10 V operation optimises density and power efficiency
  • 288-pin RDIMM form factor ensures direct compatibility with Dell PowerEdge XE9640

Dell PowerEdge XE9640 server memory kit

This 128GB kit contains four 32GB DDR5 RDIMM modules built for the Dell PowerEdge XE9640. Each module runs at 4800MHz with CL40 latency and operates at 1.10V. Registered ECC design adds error correction for data integrity in continuous workloads.

Suited for IT teams expanding Dell PowerEdge

The kit targets administrators who need registered ECC memory validated for this specific Dell platform. It is not for desktop PCs, laptops or workstations that require unbuffered non-ECC UDIMM modules. Systems using different DDR generations or pin counts cannot accept these DIMMs.

2Rx8 rank organisation determines platform fit

Each 32GB module uses a 2Rx8 configuration across the 288-pin DDR5 interface. The Dell PowerEdge XE9640 memory controller must support this rank structure for the kit to initialise correctly. Verify the server specification before ordering.

Highlights

  • 128 GB capacity across four 32 GB modules expands server memory headroom
  • DDR5 4800 speed delivers high bandwidth for demanding workloads
  • ECC registered design detects and corrects errors to protect data integrity
  • 2Rx8 organisation with 1.10 V operation optimises density and power efficiency
  • 288-pin RDIMM form factor ensures direct compatibility with Dell PowerEdge XE9640

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-328K4
Capacity128GB (4 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (4X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What CAS latency do the four 32 GB sticks run at under sustained load?

The modules operate at CL40, which is the rated latency for the DDR5 4800 kit.

What power draw and thermal output should I expect from the 1.10 V registered DIMMs running continuously?

Each DIMM runs at 1.10 V; registered DDR5 at this voltage typically draws only a few watts per module, so heat stays low in a Dell PowerEdge XE9640 chassis.

Which server platform must already be installed for this 288-pin RDIMM kit to function?

The kit is validated for the Dell PowerEdge XE9640; the motherboard must provide DDR5 RDIMM slots with ECC support.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.