We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 ECC RDIMM CL46 SuperMicro B13SEE-CPU-25G memory upgrade

SKU CH-P1VY-D5JR5

A 128GB kit of four 32GB DDR5 5600 ECC registered DIMMs built for the SuperMicro B13SEE-CPU-25G motherboard

  • Capacity128GB (4 x 32GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB total capacity across four 32 GB modules
  • DDR5 5600 speed rated at PC5-44800 for high throughput
  • ECC registered RDIMM design protects data integrity in servers
  • CL46 CAS latency at 1.1 V operating voltage
  • Validated for Supermicro B13SEE-CPU-25G motherboard compatibility

128 GB DDR5 5600 ECC RDIMM kit

This 128 GB kit contains four 32 GB DDR5 5600 registered DIMMs with ECC and a CL46 latency. It is built for the SuperMicro B13SEE-CPU-25G motherboard and targets servers or workstations that require registered memory with error correction.

Registered 288-pin modules without heat spreaders

Each module uses a 2Rx8 organisation and runs at 1.10 V. The registered design adds a buffer that reduces electrical load on the memory controller, while the bare PCB fits tightly spaced server DIMM slots where tall heat spreaders would interfere with adjacent components.

DDR5 5600 registered ECC constraints

The registered interface and ECC function only on platforms that explicitly support DDR5 RDIMMs; consumer boards that accept only unbuffered UDIMMs will not post with these modules. The CL46 timing and 5600 MT/s rate are fixed by the SPD profile, so the kit cannot be run at higher speeds or lower latencies on this platform.

Highlights

  • 128 GB total capacity across four 32 GB modules
  • DDR5 5600 speed rated at PC5-44800 for high throughput
  • ECC registered RDIMM design protects data integrity in servers
  • CL46 CAS latency at 1.1 V operating voltage
  • Validated for Supermicro B13SEE-CPU-25G motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (4X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does DDR5 5600 PC5-44800 cap at 5600 MT/s on this SuperMicro B13SEE-CPU-25G motherboard?

Yes, the kit is rated DDR5 5600 (PC5-44800) and will run at up to 5600 MT/s on the compatible SuperMicro platform.

What slot count and form factor do the four 32 GB modules need to fit the SuperMicro B13SEE-CPU-25G?

The kit contains four 288-pin DDR5 RDIMMs; the board must provide four DDR5 RDIMM slots for the full 128 GB (4 x 32 GB) configuration.

How are these ECC registered RDIMMs installed, and what step is often missed?

Power down, open the chassis, align each 288-pin module with the DDR5 RDIMM slot key, press firmly until both retention clips latch, then populate all four slots per the motherboard manual for quad-channel operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.