We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 memory modules with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 128GB 4x32GB DDR5 5600 ECC UDIMM memory upgrade for Supermicro X13SAW-TLN4F

SKU CH-F9PX-H1NTF

A 128 GB DDR5 ECC UDIMM kit with four 32 GB modules running at 5600 MHz CL46 for the Supermicro X13SAW-TLN4F motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

  • Exact DDR5-5600 ECC UDIMM kit matched to the Supermicro X13SAW-TLN4F board for full-speed recognition
  • ECC error correction stops silent data corruption and unplanned reboots during critical workloads
  • 128 GB capacity in four 32 GB modules fills the board's supported population
  • 1 V CL46 timing with 2Rx8 rank meets the controller's exact voltage and latency spec
  • Built with major-brand Samsung, Micron or Hynix chips for consistent reliability

128GB DDR5 ECC UDIMM Kit

This 128GB kit contains four 32GB DDR5 5600 ECC unbuffered UDIMMs built for the Supermicro X13SAW-TLN4F motherboard. It targets workstations and servers that require error-correcting memory at the platform's native speed.

2Rx8 1.1V CL46 Capacity

The four dual-rank modules deliver 128GB total capacity at DDR5 5600 (PC5-44800) with CL46 latency and 1.10V operation. This configuration satisfies the board's maximum supported population for unbuffered ECC UDIMMs; adding further modules is not possible on this platform.

288-Pin Unbuffered ECC Form Factor

The kit uses the exact 288-pin unbuffered ECC UDIMM form factor the X13SAW-TLN4F requires, not RDIMM or SODIMM. Builders needing registered memory or a different pin layout cannot use this kit.

Highlights

  • Exact DDR5-5600 ECC UDIMM kit matched to the Supermicro X13SAW-TLN4F board for full-speed recognition
  • ECC error correction stops silent data corruption and unplanned reboots during critical workloads
  • 128 GB capacity in four 32 GB modules fills the board's supported population
  • 1 V CL46 timing with 2Rx8 rank meets the controller's exact voltage and latency spec
  • Built with major-brand Samsung, Micron or Hynix chips for consistent reliability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the DDR5 5600 288-pin ECC UDIMM modules work alongside any existing DDR5 DIMMs I keep in the Supermicro X13SAW-TLN4F?

The kit is spec-matched to the motherboard's memory-population rules. Mixing DIMMs of different speeds, ranks, or voltage can prevent the system from running at the rated DDR5 5600 CL46 1.1V settings. For guaranteed operation, populate all slots with this matched 4×32 GB kit.

How can I verify the kit is running at DDR5 5600 CL46 with ECC active after installation?

Enter the system BIOS or use a hardware-monitoring utility in the OS. Confirm the memory frequency shows 5600 MT/s (PC5-44800), CAS latency reads CL46, voltage is 1.1 V, and ECC status is reported as enabled or active.

What does the package contain and is anything else required to install it?

The box includes the 128 GB (4 × 32 GB) DDR5 5600 ECC UDIMM kit, part number ME44800-328K4. No additional components are needed; install the modules directly into the motherboard's 288-pin DDR5 slots following the manual's population order.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.