We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in static-shield bags

NEMIX RAM

NEMIX RAM 128GB 4x32GB DDR5 5600MHz CL46 ECC Registered RDIMM memory upgrade for Supermicro X14SDI-36C-SP3F

SKU CH-6AQS-XKNBX

A 128 GB DDR5-5600 registered ECC kit in four 32 GB modules at 1.1 V CL46, built for the Supermicro X14SDI-36C-SP3F motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB capacity in a 4 × 32 GB kit
  • DDR5 5600 MHz speed rated at PC5-44800
  • Registered ECC architecture with CL46 latency
  • 1 V operation on 288-pin RDIMM form factor
  • Verified compatibility with Supermicro X14SDI-36C-SP3F motherboard

Server memory kit for Supermicro X14SDI-36C-SP3F

This 128GB kit contains four 32GB DDR5 RDIMM modules rated at 5600MHz PC5-44800 with CL46 latency and 1.10V operation. It is built for the Supermicro X14SDI-36C-SP3F motherboard and matches the board's required 288-pin registered form factor.

Registered ECC architecture for full-slot stability

Registered buffering reduces electrical load on the memory controller so all four slots run at rated capacity and speed. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads.

DDR5 5600 interface limits and population rules

The DDR5 5600 standard sets the maximum transfer rate at 5600 MT/s; the kit will not exceed this speed even if the platform supports higher grades. Motherboard manuals define approved DIMM population order and maximum capacity per channel, which can restrict usable slots or total memory.

Highlights

  • 128 GB capacity in a 4 × 32 GB kit
  • DDR5 5600 MHz speed rated at PC5-44800
  • Registered ECC architecture with CL46 latency
  • 1 V operation on 288-pin RDIMM form factor
  • Verified compatibility with Supermicro X14SDI-36C-SP3F motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 1.1 V modules need any firmware or hardware refresh after a few years of operation?

No ongoing maintenance is required; the registered ECC design corrects single-bit errors automatically and the 1.10 V JEDEC voltage is within standard DDR5 limits for the Supermicro X14SDI-36C-SP3F motherboard.

What limits sustained throughput first when all four 32 GB DIMMs run at DDR5 5600?

The CL46 latency and 2Rx8 rank organisation set the timing ceiling; the memory controller on the X14SDI-36C-SP3F drives all four slots at the rated PC5-44800 speed without down-clocking.

How much extra heat or fan noise should I expect from the 128 GB kit running continuously at 1.10 V?

Bare modules without a heat spreader run at the standard 1.10 V DDR5 voltage, so thermal output stays within normal server DIMM limits and does not demand additional airflow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.