We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR4 RDIMM sticks, bare chips, no heat spreaders

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR4 3200 CL22 ECC RDIMM ThinkMate EDX-QS10-11E3 memory upgrade

SKU CH-73TM-TFA7K

ECC registered DDR4 kit adds 128 GB across eight 16 GB modules at 3200 MT/s CL22 for ThinkMate EDX-QS10-11E3 servers

  • Capacity128GB (8 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128 GB total capacity with eight 16 GB modules
  • DDR4 3200 MHz speed rated at PC4-25600
  • ECC registered RDIMM for data integrity and stability
  • 2 V operating voltage with CL22 CAS latency
  • Validated for ThinkMate EDX-QS10-11E3 server compatibility

128 GB DDR4 ECC RDIMM kit for ThinkMate

This kit supplies 128 GB of DDR4 3200 memory in eight 16 GB registered DIMMs. It is built for the ThinkMate EDX-QS10-11E3 server platform and provides ECC error correction for data integrity. Modules run at 1.2 V with CL22 latency and a 2Rx8 organisation.

Steady throughput with registered ECC modules

The registered design places a register between the DRAM and the memory controller, reducing electrical load on the bus during sustained workloads. ECC detects and corrects single-bit errors in real time, preventing silent data corruption during long compute jobs. Eight dual-rank modules keep all channels populated for consistent bandwidth under load.

Low-voltage operation without heat spreaders

Each module operates at 1.20 V, limiting power draw in dense server configurations. The absence of heat spreaders reduces weight and allows tighter DIMM spacing in the ThinkMate chassis. Standard DDR4 cooling airflow is sufficient for normal operating temperatures.

Highlights

  • 128 GB total capacity with eight 16 GB modules
  • DDR4 3200 MHz speed rated at PC4-25600
  • ECC registered RDIMM for data integrity and stability
  • 2 V operating voltage with CL22 CAS latency
  • Validated for ThinkMate EDX-QS10-11E3 server compatibility

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K8
Capacity128GB (8 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (8X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How much power does the 1.20V DDR4 3200 kit draw when the server runs continuously?

Each module operates at 1.20V, the standard DDR4 voltage; total system draw depends on the server's memory controller and workload, not on the kit alone.

What must the ThinkMate EDX-QS10-11E3 already have to accept this 8×16GB registered ECC kit?

The board needs eight free 288-pin DDR4 RDIMM slots and a CPU memory controller that supports registered ECC DDR4 at 3200 MT/s.

Will the CL22 registered DIMMs work alongside older DDR4 modules already installed in the same ThinkMate server?

Mixing ranks, speeds or latencies can prevent the system from booting; the server will run all modules at the lowest common speed and timing if it accepts the combination at all.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.