We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR4 RDIMM modules in antistatic tray

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR4 3200 CL22 ECC RDIMM THINKMATE XF4-24S3 memory upgrade

SKU CH-8AK8-P6MTX

128 GB DDR4 3200 ECC registered server memory kit with eight 16 GB modules, CL22 latency and 1.2 V operation for Thinkmate XF4-24S3 workstations

  • Capacity128GB (8 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128GB total capacity across eight 16GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC registered design detects and corrects data errors
  • 2Rx8 dual-rank organisation with CL22 latency timing
  • Validated for ThinkMate XF4-24S3 workstation compatibility

ThinkMate XF4-24S3 128GB kit

This 128GB kit contains eight 16GB DDR4 ECC registered DIMMs built for the ThinkMate XF4-24S3 workstation. Each module runs at 3200 MT/s with a CL22 latency and operates at 1.20V. The 2Rx8 organisation and 288-pin RDIMM form factor match the system's memory architecture. Registered buffering and on-die ECC protect data integrity in server workloads.

Suited for ThinkMate XF4-24S3 upgrades

IT teams expanding a ThinkMate XF4-24S3 to its full 128GB capacity will find the exact module specification required. Buyers needing non-ECC unbuffered memory for consumer desktops or laptops cannot use these registered DIMMs. Systems limited to lower speeds or different pin counts should look elsewhere.

DDR4 3200 CL22 ECC RDIMM specification

The decisive figure is the DDR4 3200 CL22 ECC registered DIMM profile. Only platforms that accept 288-pin DDR4 RDIMMs at this speed, latency and voltage will run the kit at its rated settings. Verify the motherboard qualified-vendor list before purchase.

Highlights

  • 128GB total capacity across eight 16GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC registered design detects and corrects data errors
  • 2Rx8 dual-rank organisation with CL22 latency timing
  • Validated for ThinkMate XF4-24S3 workstation compatibility

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K8
Capacity128GB (8 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (8X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does DDR4-3200 PC4-25600 run at 3200 MT/s on this ThinkMate workstation?

Yes, the modules are rated DDR4 3200 (PC4-25600) and will operate at 3200 MT/s when the platform supports that speed.

What physical slot and clearance do the 288-pin RDIMMs need?

Each 16 GB stick is a standard 288-pin DDR4 RDIMM without a heat spreader, so it fits any DDR4 RDIMM slot with normal vertical clearance.

How are the eight 2Rx8 modules installed correctly?

Populate all eight slots in the order shown in the ThinkMate XF4-24S3 manual; the common mistake is skipping a channel or mixing ranks, which prevents the full 128 GB from being recognised.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.