We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR4 3200 CL22 ECC UDIMM SuperMicro R12SPD-A memory upgrade

SKU CH-XZ8M-XCZ1X

Eight 16 GB DDR4-3200 ECC UDIMM modules totalling 128 GB at CL22 and 1.2 V for SuperMicro R12SPD-A systems

  • Capacity128GB (8 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128 GB kit with eight 16 GB modules for high capacity
  • DDR4 3200 speed with PC4-25600 bandwidth for fast data throughput
  • ECC unbuffered UDIMM design detects and corrects memory errors
  • CL22 latency at 1.2 V for stable low-voltage operation
  • 288-pin 2Rx8 modules validated for SuperMicro R12SPD-A compatibility

System-Specific DDR4 ECC Kit

This NEMIX RAM kit supplies 128 GB across eight 16 GB DDR4 3200 ECC UDIMM modules built for the SuperMicro R12SPD-A. Each stick runs at 1.2 V with CL22 latency and uses a 2Rx8 organisation. The unbuffered design targets server and workstation boards that accept non-registered ECC memory.

Verify Motherboard Slot Count And ECC Support

Before ordering confirm that your R12SPD-A has eight free 288-pin DDR4 slots and that its BIOS enables ECC on unbuffered DIMMs. The kit requires all eight sockets to reach the full 128 GB capacity. Mixed-rank or mixed-voltage populations can prevent the system from posting.

Matched Eight-Module Kit Simplifies Population

The package delivers eight factory-matched 16 GB modules so you can fill every channel in a single step. No additional cables, software licences or heat spreaders are included. The matched set reduces the risk of timing mismatches that can cause instability in multi-DIMM server configurations.

Highlights

  • 128 GB kit with eight 16 GB modules for high capacity
  • DDR4 3200 speed with PC4-25600 bandwidth for fast data throughput
  • ECC unbuffered UDIMM design detects and corrects memory errors
  • CL22 latency at 1.2 V for stable low-voltage operation
  • 288-pin 2Rx8 modules validated for SuperMicro R12SPD-A compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-628K8
Capacity128GB (8 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB (8X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

What comes inside the 8x16GB kit and do I need anything else to install it?

The box contains eight 16GB DDR4 3200 CL22 ECC UDIMM modules for a total of 128GB. No extra parts are required; the modules plug directly into the 288-pin slots on a compatible SuperMicro R12SPD-A board.

Why choose the 128GB 2Rx8 CL22 version over a lower-capacity kit?

This kit delivers 128GB across eight dual-rank 16GB sticks running at 3200MT/s with CL22 timing at 1.2V, maximising the R12SPD-A's supported memory density while keeping ECC error correction active.

What does the 3200 CL22 rating mean once the memory is running in the server?

The modules operate at 3200MT/s (PC4-25600) with a CAS latency of 22 cycles at 1.2V, providing 128GB of ECC-protected bandwidth for the SuperMicro R12SPD-A's memory controller.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.