We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR5 4800 CL40 1.1V ECC RDIMM Dell PowerEdge XR5610 memory upgrade

SKU CH-J319-JAJ3X

128GB DDR5 4800 ECC RDIMM kit in eight 16GB modules for Dell PowerEdge XR5610 servers

  • Capacity128GB (8 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128GB total capacity for memory-intensive server workloads
  • Eight 16GB modules populate all Dell PowerEdge XR5610 slots
  • DDR5 4800 speed with PC5-38400 bandwidth for high throughput
  • ECC registered RDIMM design protects data integrity under load
  • Low 1.1V operation reduces power draw in rack environments

Dell PowerEdge XR5610 memory kit

This 128GB kit contains eight 16GB DDR5 RDIMMs built for the Dell PowerEdge XR5610 rack server. Registered ECC modules detect and correct single-bit errors to protect data integrity in always-on workloads. The kit targets IT teams who need validated capacity expansion for this specific platform.

288-pin registered DDR5 build

Each module uses a 288-pin DDR5 interface with a 1Rx8 organisation and operates at 1.10V. The registered design adds a buffer that reduces electrical load on the server memory controller, helping stability when all eight slots are populated. No heat spreader is fitted, so airflow across the bare PCB must be provided by the chassis.

Eight matched modules in one package

The box delivers the full 128GB as a matched set of eight 16GB sticks, removing the need to source individual DIMMs. CL40 latency and 4800MT/s speed are pre-configured for the qualified server profile. Buyers who need a different capacity per module or a non-ECC configuration cannot use this kit.

Highlights

  • 128GB total capacity for memory-intensive server workloads
  • Eight 16GB modules populate all Dell PowerEdge XR5610 slots
  • DDR5 4800 speed with PC5-38400 bandwidth for high throughput
  • ECC registered RDIMM design protects data integrity under load
  • Low 1.1V operation reduces power draw in rack environments

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (8X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What DDR5 standard and speed does the 128GB kit use?

The modules run at DDR5 4800 (PC5-38400) with CL40 latency at 1.1V.

What physical slot and module count are required for this Dell PowerEdge XR5610 upgrade?

Eight 288-pin RDIMM slots are needed; the kit contains eight 16GB single-rank modules.

How is the registered ECC memory installed and what step is often missed?

Power down the server, open the chassis, insert each RDIMM into the slots specified in the Dell manual, then enable ECC in BIOS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.